| | | Description |
|
Onsrud DownCut Spiral Bits
|
|
Double-edge High Speed Steel spiral router bits provide a smoother finish when trimming and sizing material.Recommended when chip flow should be directed down to protect the finish on top of the material being cut.Available in 3/8 and 1/4 Diameters.
|
|
Offset Router Plate
|
|
New and improved offset router plate provides maximum control of fixed base routers. Reduces the natural tipping that can occur when routing an edge.
|
|
Ogee Shaper Cutter Bit
|
|
Industrial quality carbide shaper cutter offers incredible quality at an affordable price!
|
|
Rockler Lock Miter Shaper Cutter
|
|
Industrial quality carbide shaper cutter offers incredible quality at an affordable price!
|
|
Rockler Classic Ogee Shaper Cutter
|
|
Industrial quality carbide shaper cutter offers incredible quality at an affordable price!
|
|
Rockler Panel Shaper Cutters
|
|
Industrial quality carbide shaper cutters offer incredible quality at an affordable price! Choose from 15º Flat Panel Shaper Cutter, Ogee Panel Shaper Cutter and Cove Panel Shaper Cutter.
|
|
Rockler Bead and Ogee Rail Stile Sets
|
|
Industrial quality carbide shaper cutters offer incredible quality at an affordable price! Choose from Bead Rail & Stile Set and Ogee Rail & Stile Set.
|
|
Rockler Ogee Bead Table Edge Shaper Cutter
|
|
Industrial quality carbide shaper cutter offers incredible quality at an affordable price!
|
|
Rockler Door Lip Shaper Cutter
|
|
Industrial quality carbide shaper cutter offers incredible quality at an affordable price!
|
|
Rockler Drawer Joint Shaper Cutter
|
|
Industrial quality carbide shaper cutter offers incredible quality at an affordable price!
|
|
Rockler Male Female Sash Shaper Cutters
|
|
Industrial quality carbide shaper cutters offer incredible quality at an affordable price! Choose from Female Sash Cutter and Male Sash Shaper Cutter.Please Note: The Female Sash Shaper Cutter is SOLD OUT.
|
|
Router Speed Control
|
|
New and improved router speed control gives you much more range in your speeds than our previous model.
|
|
Rockler Router Guide Bushing Kit
|
|
Our 11-piece template guide kit will work with any template, pattern or jig for perfect duplicate routing. Ideal for stair, pattern and hinge routing, dovetailing and craft/hobby work. Fits any base with a 1-3/16' diameter center hole.
|
|
Leigh D4R Dovetail Jig
|
|
The best multi-faceted joinery system on the market! Produce no-slop through, half blind and sliding dovetails with a classic handcut look.
|
|
Hinge Mortise Router Bits
|
|
Top quality router bits designed for hinge mortising. Choose 1/2 or 3/4' diameters for 1/4 or 1/2' shanks. Each bit is 3/4' in height.
|
|
Freud Exclusive Recoverable Bead Bits
|
|
Recoverable bead bits let you create glass cabinet doors that look as good from the back as the front because the grain is matched from the same piece of wood!
|
|
TurnLock Router SignCrafter System
|
|
System includes everything you need to create beautiful signs with your router!TurnLock technology lets you easily mount/dismount your router in seconds without tools!Includes TurnLock 7 clear base plate with centering pin that fits most routers, 7/16 and 5/8 bushings, 3/8 carbide core box bit, and 164 letter and number templates.
|
|
30 Degree Chamfer Bead Profile Bit
|
|
Rockler exclusive! Ideal for drawer fronts to complement raised panel doors.
|
|
Provincial Edge Bit
|
|
Speciality molding bit for decorative edges.
|
|
Beaded Base Molding Bit
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
Crown Molding Router Bit
|
|
Speciality molding bit for decorative edges.
|
|
Modern Bead Bit
|
|
Speciality molding bit for decorative edges.
|
|
Classical Edge Bead Bit
|
|
Speciality molding bit for decorative edges.
|
|
Adjustable Finger Joint Router Bit
|
|
Adjustable finger joint router bits have removeable cutters and adjust for wood thicknesses 7/16 to 1-3/8. One cutter is 7/32 and five cutters are 1/16. Reconfigure cutters to achieve joints on different wood thicknesses.
|
|
Rockler Rabbeting Bit Set
|
|
Carbide-tipped rabbeting router bit with four bearings allows you to cut 5/16, 3/8, 7/16 and 1/2 horizontally and up to 1 vertically.Includes Allen wrench.1-3/8 diameter.1 height.1/2 shank.
|
|
Vertical Panel Router Bit Set With Wooden Case
|
|
Everything you need to make raised panel doors in a handy wooden case. Set includes bead edge stile and rail router bits and ogee profile vertical raised panel bit.
|
|
Biscuit Cutter Set
|
|
Includes cutter and all three bearings to cut biscuit slots for 0, 10 and 20 size biscuits. All have baked-on Teflon coating to reduce pitch and resin buildup.
|
|
Round OverBeading Bit Set
|
|
Includes bearing to convert all bits from roundover to beading, giving you six options! Includes 1/8', 1/4' and 3/8' radius bits.
|
|
4Piece Straight Bit Set
|
|
Features the four most commonly used straight bits, including 1/4', 3/8', 1/2' and 3/4' size bits.
|
|
Rabbeting Bit Set
|
|
Includes bit and bearing soft 5/16', 3/8', 7/16' and 1/2' rabbets. Allen wrench included. Vary cutting depth by changing bearing.
|
|
Router Xtreme Xtension8482
|
|
Change router bits from above the table with only one tool — PLUS extend router bit’s reach.
|
|
Rockler TSlotwall Cutter Bit
|
|
Easily customize your workshop or home storage systems by making your own slotwall!Carbide-tipped bit cuts 5/16 x 1-1/16 slot with 3/8 groove.
|
|
Router Bit Height Adjustment Handle
|
|
For use with all Porter-Cable 890 and 8529 series routers.Raise and lower your cutter height quickly and easily from above the router table.
|
|
Custom Door Edge Router Bit
|
|
Custom Door Edge Router BitRockler exclusive carbide-tipped router bit matches the most popular profile used in the kitchen cabinetry industry today.1-5/8 diameter1 height1/2 shank
|
|
14 and 12 Router Bit Holders
|
|
Organize and conveniently store your router bits with an adjustable router bit holder. Mounts to router table, wall, bench or shelf for quick, easy access. Holds up to 10 bits available in either 1/4 or 1/2 shank capacity.
|
|
Rub Collars for Shaper Cutters
|
|
Ball bearing center rub collars available in 1-1/8 to 2-15/16 sizes. Used under or over shaper cutters for shaping such as cathedral or arched doors.With steel sleeves.
|
|
WoodRatreg PlungeBar
|
|
Smooth plunge action for cleaner cuts!Plunge the cutter without pushing on the work — no burns or ragged entry as you plunge the bit with fingertip precision.
|
|
Rockler Log Tenon Maker
|
|
Building beautiful rustic furniture is easier than ever with our mortising system! Cut log tenons in half the time of 'pencil sharpener' style cutters. Build your own log furniture, log handrailing, log fences and more. For your first project, check out our FREE Step Stool Plan.See our Rockler Log Tenon Maker Video Workshop.
|
|
Rockler Flush Door Trimming Bit
|
|
Carbide-tipped cutter handles all thicknesses of doors up to 2 thick. With top bearing for easy cutting.3/4 diameter.2 height.1/2 shank.
|
|
Freud Table Top Classical Bit
|
|
Application: Ornamental edge for tables and desks. Ideal for enhancing the beauty of the wood found in occasional and dining room tables. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
|
|
Freud Canoe Joint Bits
|
|
Application: Producing joints for projects such as circular planters and canoes. Bit 99-017 cuts the flute and 99-018 cuts the mating bead. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as table-mounted portable routers.
|
|
Freud Bold Classical Bit
|
|
Application: Chair rails and other decorative millwork. Forms beautiful wainscot and panel moldings. Create numerous molding profiles by using various bearings and multiple passes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.li
|
|
Burgess Edge Router Bits
|
|
Easily create a durable solid wood look wherever you have an exposed plywood, MDF or melamine edge!Great for edgebanding cabinet doors, shelves and cabinet edges.
|
|
TurnLock Router Offset Base
|
|
Clear 13 long offset base provides extra stability for safe router operation and stable edge work.
|
|
TurnLock Router CircleEdge Guide
|
|
Make circle- and edge-guided cuts with one tool!Metal edge guide easily adjusts for cuts up to 13 from the board edge, while the circle cutting guide with aluminum arm allows you to cut circles up to 51 diameter.
|
|
Freud Chamfer Bits
|
|
Application: For multiple-sided projects, joinery, and easing edges. Creates a uniform chamfer on the edge of any work piece to add character, while retaining crisp geometric lines. Use 22-1/2 degree chamfer bits for 8-sided constructions, and 30 degree bits for 6-sided constructions. Chamfer size easily adjusts by changing the height of the bit. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Bearing Flush Trim Bits
|
|
Application: Trimming laminate counter topsand doing pattern work. These are the bits to rely on for a smooth, burn-free. cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
Freud Downshear Helix Flush Trim Bits
|
|
Application: Trimming laminate counter tops and doing pattern work. Downshear cutting angle produces a slicing action for chip-free, splinter-free cuts on the top surface of laminates and veneers. The shear action also delivers easier, smooth cuts in thick materials. The 3/4 diameter body and full 1 or 2 cutting length provide the stability and cutting capacity for thick stock or for routing multiple parts with a template. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers for template work.
|
|
Freud Flush Trim V Groove Bit
|
|
Application: Trimming laminated countertops and cabinets. Adds small, decorative “V” groove while bringing a cabinet frame flush with the front of the cabinet, or trimming a laminated top. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on portable or table-mounted routers.
|
|
Freud Top Bearing Flush Trim Bits
|
|
Application: Template work and lettering. The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Top Bottom Bearing Flush Trim Bit
|
|
Application: Trimming laminate counter tops and doing pattern work. Double bearing design allows you to choose the cutting direction that best suits your work piece. Freud’s Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern. Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Cuts all hardwoods, softwoods, plastic laminates and veneered plywood. Use on hand-held routers, laminate trimmers, and table-mounted portable routers.
|
|
Trendreg Mortise Tenon Jig
|
|
Quick, accurate and versatile jig allows you to cut perfect-fitting mortise and tenons with a plunge router — requires only one setup to cut both pieces.Ideal for cabinet, chair and table construction.
|
|
Incra Universal Precision Positioning Jig
|
|
The original Incra Jig is back — available exclusively at Rockler!Even the novice woodworker can produce beautiful joinery on the router table.Easily create joints such as dovetails, box and double dovetails with precision.Comes with FREE 1-hour instructional DVD and joint-making templates ($19.99 Value)Fence, stop block and right angle fixture package sold separately.Shown with our Rockler Offset Router Table. Router Table sold separately.View Incra Universal Precision Positioning Jig Video Demonstraton ---
|
|
CMT glass panel door set
|
|
This unique stile and rail router bit set allows you to easily create custom glass panel doors.
|
|
Freud QuadraCut Table Top Classical Bold Bit
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Table top classical bold bit applications: Decorative edge for tables and desks. Designed with sharp curves to generate a strong, uplifting edge.Creates a bold effect on furniture of all types.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers
|
|
Freud Slotting Cutter Set
|
|
Application: Producing slots and grooves 9/16 deep for T-moldings, Spline Joints, Tongue & Groove Joints, and other applications. Includes three wing slotting cutter, arbor and ball bearing. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud UpSpiral Router Bits
|
|
Upward spiral is perfect for ejecting chips from mortises. It’s also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2 shank.Application: Cutting mortises and routing deep blind holes Freud’s solid carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings.Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Freud DownSpiral Router Bits
|
|
This premium solid carbide bit cuts dadoes with crisp, clean edges on both sides of the dado. The downward spiral forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Also works great for cutouts and edgework. 1/2 shank. Application: Grooves and dadoes in single-sided veneers and laminates. Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Freud Double Compression Spiral Router Bit
|
|
The ultimate high-performance straight bit eliminates chipping on both sides of the workpiece. Ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid Carbide. 1/2 shank.Application: Fine finish, chip-free routing indouble-sided veneers and laminates. Combination of up and down shear flutes eliminate chipping on both sides of double-sided veneers or laminated materials for a fine finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Freud Traditional Beading Bits
|
|
Application: Matching moldings in historic homes. Forms a single bead with a square shoulder. Commonly used by remodelers to match base moldings in historic homes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Raised Panel Bits with Back Cutters
|
|
Use this piloted horizontal raised panel router bit to cut both straight and arched top door panels. Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass for a perfect panel edge thickness every time.
|
|
Freud Face Molding Bit
|
|
Application: Door casings, trim, baseboards, and pilasters. Add architectural detail to your furniture, cabinets and millwork. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
18 Inch Shank Miniature Router Bits
|
|
Our Rockler exclusive 1/8 shank solid carbide and carbide-tipped router bits are unlike anything else on the market and not available anywhere else! These innovative mini-moto tool bits are ideal for free-hand work such as sign making, inlaying, mortising, adding a decorative edge on soft and hardwoods, and making miniature moldings.
|
|
Freud Dovetail Bits
|
|
Application: Strong, attractive joints for drawersand boxes. Compatible with popular dovetail jigs, these bits produce smooth, intricate dovetail joints. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Freud Panel Pilot Bits
|
|
Application: Template work & cutting openingsin paneling, siding, etc. Freud’s Panel Pilot Bits will outlast high-speed steel bits many times before sharpening. The drill through point allows self-starting, and the pilot acts as a guide for template work.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on portable routers for template work.
|
|
Freud Cove Bits
|
|
Application: Smooth, decorative edging and inverted radii. Create smooth, classic cove profiles with Freud cove bits, which have a shear angle that slices wood similar to the way a craftsman uses a hand plane. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
|
|
Router Bit Maintenance Kit
|
|
This kit will remove pitch and resin from your cutters, eliminating excess heat and friction, and keeping your router bits running cool for clean cuts and a long life. Includes 8 ounce bottle of Pitch and Resin Remover (makes 1 quart), brass-bristled scrub brush and a plastic jar with lid.
|
|
Freud Rabbeting Bits
|
|
Application: Joining boards and letting in back panels. Produces super smooth cuts on both surfaces of the rabbet. Steel pilots can be removed from bits and used with edge guides for wider rabbets. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.Rockler numbers 37081, 31421, 33592 include multiple bearings for a variety of cut depths.
|
|
Freud Rounding Over Bits
|
|
Application: Soften furniture edges and create decorative rounded edges. Use rounding over bits to soften furniture edges and to create decorative rounded edges.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
|
|
Freud Beading Bits
|
|
Application: Createdecorative bead edges. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
|
|
Freud Roman Ogee Bit
|
|
Application: Decorative edging for cabinets,molding and furniture. Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted routers
|
|
Freud QuadraCut Cove and Bead Bits
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.Application: Decorative edging for cabinets, molding and furnitureAdd distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted routers.
|
|
Piloted Flush Trim Bit
|
|
Piloted Flush Trim Bit
|
|
Freud TSlotting Cutter Bits
|
|
Application: Slotted wall displays. Build your own sturdy, attractive, slotted wall to display items from garden tools and power tools to toys – hanging by a hook. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Freud Three Wing Slotting Cutters
|
|
Application: Producing slots and grooves for T-moldings, spline joints, tongue & groove jointsand many other applications. Should be used with Freud's slotting cutter arbors 60-100 for 1/4 shanks and 60-102 for 1/2 shanks. Compatible with 62-108 bearing. Cutter 56-109 can be used for biscuit joining. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
|
|
Woodsmith Fingerjoint Jig
|
|
The easy accurate way to get perfect-fitting box joints. Attaches to any miter gauge, works on any table saw or router table. Free instructional DVD included!
|
|
NonSlip Router Mat
|
|
24 x 36 non-slip pad holds projects firmly in place.Ideal for use with routers, electric sanders and more!Rolls up for easy storage.Black.
|
|
Router Bit SetUp Jigs
|
|
Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more.
|
|
Freud Half Round Bits
|
|
Application: Bull nose profile for furniture andmoldings Produce a fully rounded edge on dimensional lumber or create an attractive half-round profile on furniture and moldings with this bit. Guiding device must be used. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Use on hand-held and table-mounted portable routers.
|
|
Freud Triple Beading Fluting Bit
|
|
Application: Columns, posts and decorative moldings. Enhances moldings and furniture with multiple beads and fluting. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Plunge Router Base
|
|
Fits most 3-1/2' diameter Porter-Cable (or previous Rockwell), motors.
|
|
Freud Round Over Bowl Bits
|
|
Application: Trimming joint between solid surfacecountertops and solid surface sink bowls with a smooth, rounded edge. Specially formulated carbide is ideal for fabricating solid surface materials. Features non-marring synthetic bearing to protect finished edges. Cuts all solid surface materials. Use in hand-held portable routers.
|
|
Freud Wavy Joint Bit
|
|
Application: Producing a sturdy joint in solid surface countertops. Waves formed in material accommodate more surface glue, creating a solid joint. Specially formulated carbide is ideal for fabricating solid surface materials. Cuts all solid surface materials. Use on hand-held portable routers.
|
|
Router Raizer
|
|
There’s never been an easier or safer way to get quick depth-of-cut adjustments with your plunge router. The Router Raizer lets you work from both the topside and underside of your router table. Router plate shown not included.
|
|
Freud Round Nose Bits
|
|
Application: Fluted millwork, signs and decorative veining. Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wood signs. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Large Router Bit Case
|
|
Solid wood cases firmly hold 1/4' and 1/2' shanked router bits for easy carrying and convenient storage. Bits won't rattle traveling from job site to job site.Bits not included.
|
|
Rockler Router Bit Tuneup Kit
|
|
This easy-to-use, 20-piece kit contains the most commonly used bearings, lock nuts, stop collars screws and allen wrenches. Comes in a convenient plastic storage case. Bits not included.
|
|
Tambour Router Bit Set
|
|
Design your own tambour! This tambour router bit set allows you to custom-make any wood tambour. Choose the width, length and wood species for your project!
|
|
4212 PorterCable 12 Dovetail Jig
|
|
Cuts through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails, and dovetail dados.Patented alignment lines and router bit depth stop allow for quick, easy set-up Handles stock from 1/4' to 1-1/8' thick and up to 12' wide
|
|
4Piece Straight Bit Set
|
|
Features the four most commonly used straight bits, including 1/4', 3/8', 1/2' and 3/4' size bits.
|
|
Specialty Molding Router Bit
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
Jasper Model 400 Circle Jig
|
|
The Jasper Model 400 will make 105 different-sized circles in 1/16 increments, from 1 to 7-1/2 in diameter. Pre-drilled for mounting on virtually any router. With calibrated scale to read direct cutout diameter when 1/4 router bit is used. Comes with all hardware for mounting.
|
|
PorterCable Router Base
|
|
Our router bases save you time and money. This Porter-Cable base with lever release mounts permanently in your router table to eliminate endless attaching and detaching. Precision-machined aluminum.
|
|
14 12 Router Collet O Rings
|
|
Prevent creeping of your router bit! These rubber 'O' rings raise the shank of your router bit off the base of the collet assembly. Available in 1/4 or 1/2. Sold in packages of 10.
|
|
Rockler Router Bit Sets
|
|
Choose from five affordable router bit sets - all with K10 and K20 grade carbide for clean cutting action and final sharpened with 400 grit diamond wheels for longer cutting life. All with 1/4' shanks.
|
|
Full Bead Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Eliminator Chuck
|
|
Adjust bits with one hand!
|
|
Specialty Molding Router Bit for Decorative Edges
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Micro Drill Chuck
|
|
Designed for the most exact, fine-detailed drilling jobs, this specially-machined 4-jaw chuck fits in standard chucks to securely hold the smallest drill bits—from #61 (.039) down to #97 (.0059). It is ideal for close-up drilling on delicate work pieces like miniatures, model clocks, jewelry, electronics, and more!
|
|
STS Slot Mortiser Kit
|
|
Rout perfect mortises safely and precisely with this ingenious mortising sled. No more balancing your router on a narrow jig. Just slide this jig along your miter track and use your router lift to make depth adjustments. Plus, since you can easily rout mortises in the ends of your rails, it’s the perfect solution for loose tenon joinery! Accurate multi-axis positioning provides consistent control of the length, position and depth of any slot. Rivals the capabilities of tools costing thousands. Perfect for table leg/apron assemblies, face frame and casework construction, picture framing and more. Easy-to-assemble kit includes everything you need, just screw it together and you’re ready to roll. Detailed instruction manual included.
|
|
Horizontal Panel Router Bit Set With Wooden Case
|
|
Both the panel, rail and stile bits all in one convenient box.
|
|
Straight Router Bit
|
|
Top quality straight router bits that meet the high standards of Rockler Woodworking and Hardware. One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal.
|
|
Freud Four Wing Slotting Cutters
|
|
Application: Producing slots and grooves for T-moldings, spline joints, tongue & groove jointsand many other applications. Should be used with Freud's slotting cutter arbors 60-100 for 1/4 shanks and 60-102 for 1/2 shanks. Compatible with 62-108 bearing. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Distinctive Series Dovetail Router Bits
|
|
These top-quality carbide bits work with wood thicknesses ranging from 1/8 to 5/8, allowing you to cut joints for delicate jewelry boxes, as well as for sturdy drawers. 8° dovetail angle offers a more traditional look, and less chance of breakage at the corner of the tail. Beefy 8mm shanks minimize vibration and chatter. All three work perfectly with the 5/16 straight bit included with Jig 22818. Unconditionally guaranteed.
|
|
Freud QuadraCut Classical Cove Round Bit
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Decorative edging for cabinets,molding and furniture. Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted routers
|
|
Raised Panel Door Templates
|
|
These templates make it easier to make raised panel doors from 9-1/2' to 22' wide without the need for hold down jigs.
|
|
Porter Cable DHandle
|
|
Works with Porter Cable’s 690 routers. A 'handy' addition to your 693PK router package with the plunge base! Handle has built-in trigger switch. Also available: 693VSPK Porter Cable combo set with 690 router, standard base and plunge base
|
|
Jasper Model 300 Circle Cutting Attachment
|
|
Designed to fit most plunge router base plates, this circle cutting jig lets you make 184 sizes of perfect circles from 7' all the way up to 52-3/4'!
|
|
Rockler Rail Coping Jig
|
|
For rail and stile doors. Allows you to easily make clean cope cuts without blowouts. Perfect for narrow cross-grain rail cuts.
|
|
Freud Double Flute Straight Bits
|
|
Application: General stock removal with a smooth finish.Freud straight bits cut smoother than other bits because of the precise shear and hook angles.End of bit relief allows for fast plunging.Cuts all composite materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.(Click More Info above for specific router bit dimensions)
|
|
Freud Stagger Bits
|
|
Application: Smooth, fast cutting in thick materials. These bits combine the balance of a double fluted bit with the speed and versatility of a single flute tool. #14-204 compression bit has opposing shears for an exceptionally clean edge on both the top and bottom of the cut. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Freud Mortising Bits
|
|
Application: Down shear works to eliminatesplintering ideal for hinges, mortises, and dadoes. Freud’s Mortising Bits are designed with deep center gullets for maximum material removal without chip loading.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Specialty Molding Router Bit
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
Router Table Foot Pedal
|
|
Get hand-free on and off operation of any bench top power tool up to 15 amps!
|
|
Classic MultiForm Router Bit
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Multi-Form bits make a variety of molding profiles.
|
|
RouterLoc Router Bit Holder
|
|
Keeps you bits organized and in reach.
|
|
14 Dovetail Pattern Router Bit
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
Classic Plunge Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Handrail Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Triple Bead Router Bit
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
Cathedral Door Templates
|
|
Cathedral Door Templates
|
|
Arch Door Templates
|
|
Arch Door Templates
|
|
Specialty Molding Router Bit
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
Leigh Super 12 Dovetail Jig
|
|
Extraordinary joint making capability at an exceptional price point! Cut variably spaced Through & Half-blind dovetails easily and accurately. Infinitely adjustable one-piece fingers are easily positioned for any joint pattern, and you are always guaranteed a half pin at each edge of the joint. Rout half-blind pin boards and tail boards at the same time. The finger assembly can also produce two sizes of box joints, 5/16” and 5/8”. Adjustments for fit can be made in increments of .002”. You can even install the included crosscut fence and the dovetail finger assembly becomes a sliding dovetail template. Available in three widths: 12”, 18” and 24” to satisfy the needs of every woodworker and every budget.
|
|
Rockler 5Pc Starter Bit Set
|
|
Set consists of the most common router bits used in everyday woodworking projects.Save more than $17 versus buying bits separately!
|
|
Rockler 3Pc Signmaking Router Bit Set
|
|
Our most popular signmaking bits in one convenient set! Save more than $12 versus buying the bits separately.
|
|
Rockler EllipseCircle Router Jig
|
|
Now you can easily create perfect circles, ellipses and sweeping arcs! With your router and this handy, easy-to-use jig, youll be able to make picture frames, mirrors, signs, tabletops and more in just a matter of minutes. Compare to other ellipse/circle router jigs that cost $100 more. View the Ellipse Jig Demonstration Video ---
|
|
Foam Router Bit Storage
|
|
Keep your bits comfortably stored in a nice, soft bed of foam. Foam is pre-cut to hold any size router bit shank. The 12' x 12' x 13/4' bed holds up to 100 bits, depending on sizes stored.
|
|
18 Miniature Roundover Router Bit
|
|
Rockler miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts!
|
|
14Miniature Roundover Router Bit
|
|
Rockler miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts!
|
|
Miniature Classic Roman Ogee Router Bit
|
|
Rockler miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts!
|
|
Miniature Roman Ogee Router Bit
|
|
Rockler miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts!
|
|
Miniature Chamfer Router Bit
|
|
Rockler miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts!
|
|
Miniature Classic Router Bit
|
|
Rockler miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts!
|
|
Solid Carbide Flush Trim Router Bit carbide bit
|
|
Solid Carbide Flush Trim Router Bit is a fantastic value. This bit is competitively priced while offering high performance and long life.
|
|
Pattern Flush Trim Router Bit
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
Flush Trim VGroove Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Beall WoodThreader Kit
|
|
The Beall Wood Threader uses your router to cut external threads on wooden dowels. Since the bit used for cutting is solid carbide, you can produce thousands of threads without ever sharpening or adjusting its angle. It can thread any species of wood (including exotics) without pre-treating - and many plastics, as well.
|
|
PorterCable 690 Router Base Plate
|
|
An exceptional value on two of our most popular router accessories. Add capabilities to your router table and save money at the same time!
|
|
1 Dish Carving Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Router Bushing Set
|
|
Includes 7 bushings 2 locking nuts all in a convenient plastic case.
|
|
Guide Bushings
|
|
Mounts to routers for following templates and dovetail jigs. Template guides fit perfectly in any base with a 1-1/4' diameter center hole. Choose guide bushing type below. Locking nuts Sold Separately.
|
|
Router Edge Guide
|
|
Save more than 50% compared to other edge guides! Perfect for simple flutes, dados rabbets, and more. The Plexiglas tool is easy to set and adjusts from 0 to 7 inches. The 3/4 inch x 5/8 inch fence can be used on a table surface.
|
|
Plywood Bit Set
|
|
Includes the three most common sizes of straight bits for undersized plywood: 23/32' for 3/4' plywood, 31/64' for 1/2' plywood, and 15/64' for 1/4' plywood.
|
|
Rabbeting Bit Set
|
|
Includes bit and bearing soft 5/16', 3/8', 7/16' and 1/2' rabbets. Allen wrench included.
|
|
RoundoverBeading Bit Set
|
|
Includes bearing to convert all bits from roundover to beading, giving you six options! Includes 1/8', 1/4' and 3/8' radius bits.
|
|
Freudreg 2pc Entry Interior Router Bit Set
|
|
Use this router bit set to build custom doors with true rail-and-stile construction for rock-solid joints that last a lifetime.Mills perfect 1-3/4 rail and stile joints for exterior doors.To mill 1-3/8 interior door joints, simply remove spacers from each bit.
|
|
PorterCable Dovetail Jig Router Bit
|
|
Carbide-tipped replacement router bit for Porter-Cable 4210 and 4212 dovetail jigs.1/2 shank.3/4 cutting length.17/32 diameter, 7-degree.
|
|
PorterCable Dovetail Jig Router Bit
|
|
Replacement router bit for Porter-Cable 4210-4212 dovetail jigs.
|
|
Inlay Bushing and Bit with Removable Collar Internet Only Special
|
|
You can cut both the inlay and the opening with just one template.Hurry, Quantities are Limited. Offer valid while supplies last!
|
|
Router Compass
|
|
Let’s you cut perfect circles, arcs, and radius corners for tabletops, lazy susans and wheels. Also cuts circular grooves ranging from 8' to 48' in diameter. Heavy duty clear plastic offers a complete view of your work in progress.
|
|
36 Miter Track
|
|
When you need a miter slot for a jig you are building.
|
|
Space Balls
|
|
Use these space balls to center raised panels in their frames thereby ensuring flawless frame and panel assemblies. Perfectly centers and tightly secures solid center panels in the frame. Insert space balls in your rail and stile grooves to prevent panel rattle. 8-10 space balls per door recommended. Synthetic rubber 0.26' diameter.Packs of 100
|
|
Rockler 2Pc Drop Leaf Table Rule Joint Router Bit Set
|
|
Making a drop leaf table connection edge is easy with this handy router bit set.Save more than $14 versus buying the bits separately.
|
|
Leigh Finger Joint Templates
|
|
Create beautiful and strong finger joints the easy way with the most comprehensive and accurate jigs of their kind! Finger joints — or box joints — add visually striking design to corner assemblies and are as strong as dovetails due to their large glue surface.
|
|
Leigh FMT Frame Mortise and Tenon Jig
|
|
If you can use a plunge router, you can cut strong and perfectly fitting mortise and tenon joints in no time. Easily rout single, double, twin, quadruple or even triple mortise and tenon joints, plus angled and compound-angled joints, in stock up to 3 x 5. Virtually any plunge router will fit and still be available in seconds for other uses.
|
|
Complete Dovetail Jig
|
|
Cutting beautiful through and half-blind dovetails is fast and easy with our new and improved dovetail jig! Rockler exclusive one-piece stop gives you the perfect offset every time for dead-on dovetailing accuracy. And our new preset template guide allows for quick initial setup for 1/2 to 3/4 thick stock. Jig will cut half-blind dovetailed joints from 1/2 to 1-1/8 thick and full through dovetails from 3/8 to 3/4 thick. Accommodates stock up to 11 wide. Patent pending.Our best and most versatile dovetail jig ever!
|
|
Rockler Dust Collector for Rockler Dovetail Jigs
|
|
Finally, an affordable dust collector for your Rockler dovetail jig! You don’t have to spend hundreds of dollars to get dust collection with a dovetail jig. Our revolutionary new dust collector eliminates virtually all the dust created when cutting dovetails. It easily attaches to Rockler’s dovetail jigs (both new and old!) and a shop vacuum or dust collection system to provide you with a clean cutting area and safe working conditions.Easily attaches to Rockler’s dovetail jigs Built-in 2-1/4 port fits most shop vac hoses (not included). View the Dovetail Jig Dust Collector Demonstration Video ---
|
|
PorterCable Microadjust Edge Guides
|
|
When you want absolute precision, this is the edge-guide to use. Solid construction, with an anodized extruded aluminum body for strength and durability.
|
|
Edge Routing Dust Port
|
|
Eliminates dust while flush trimming and routing small decorative edges — among the most common routing jobs woodworkers encounter! Offers easy tool-free installation onto any router baseplate that accepts a standard Porter Cable template guide bushing. 2-1/2 O.D. dust port.
|
|
CircleGrommet Templates
|
|
No more rummaging through a stack of templates for the right size, this package combines the most common grommet sizes into two templates. Each size is clearly labeled for quick identification. Transparent acrylic with fine cross-hairs on each hole makes it easy to align the template with your pencil marks. Includes 13 circle sizes and two oval sizes. Use with the 5/8 Short-Shank Guide Bushing, which is specially designed for 1/4 template stock.
|
|
Large Ellipse Base
|
|
This larger base works with the Ellipse/Circle Router Jig for more design flexibility and ellipses with narrower proportions. The larger size increases the maximum difference between the major and minor axes from 8 to 14. In other words, the maximum length of the major axis remains 52, but the minor axis can be up to 14 shorter than with the standard base. Base includes 2 extra dovetail keys with pivot pins. Made of solid phenolic for easy sliding.
|
|
Leigh YAxis Mortise Guides
|
|
Use your Leigh FMT to flip your mortises on their sides! Some joints, like dust dividers in a chest of drawers, require mortises to be routed at 90º to the clamp plate. The new Y-Axis mortise guide can produce six sizes of mortises: 1/4 x 3/8, 1/4 x 1/2, 1/4 x 3/4, 5/16 x 1/2, 5/16 x 3/4 and 1/2 x 1. Additional sizes can be routed using table limit stops and different bit sizes. Note: New FMT guides not exactly as shown.
|
|
Leigh Router Bit Sets for Isoloc Joint Templates
|
|
These 3-pc. sets contain all three Leigh isoloc bits for perfect decorative joints, both standard and inlaid. Both include 5/16, 1/4 and 3/8 bits. 38339 (Leigh item 1617I) is HSS. 37395 (Leigh item 1617I-C) is solid carbide.
|
|
Leigh Boxed Router Bit Sets for FMT Mortise and Tenon Jig
|
|
39997 is a High Speed Steel bit set, and includes all the standard bits for the FMT. HSS does not keep an edge as long as carbide, but it is less expensive. Includes No.'s 162, 164, 166, 168, 170-500, 173-500, 177 and 180. Also includes storage box.Leigh item 162-180.35570 is a Solid Carbide Spiral Upcut bit set, and also includes all the standard bits for the FMT. Carbide keeps an edge for a lot longer. Includes No.'s 162, 164C, 166C, 168C, 170-500C, 173-500C, 177C and 180CL. Note: No.162 is high speed steel. Also includes storage box. Leigh item 162-180C.
|
|
Leigh Super 18 Dovetail Jig
|
|
Extraordinary joint making capability at an exceptional price point! Cut variably spaced Through & Half-blind dovetails easily and accurately. Infinitely adjustable one-piece fingers are easily positioned for any joint pattern, and you are always guaranteed a half pin at each edge of the joint. Rout half-blind pin boards and tail boards at the same time. The finger assembly can also produce two sizes of box joints, 5/16” and 5/8”. Adjustments for fit can be made in increments of .002”. You can even install the included crosscut fence and the dovetail finger assembly becomes a sliding dovetail template. Available in three widths: 12”, 18” and 24” to satisfy the needs of every woodworker and every budget.
|
|
Mortise Centering Router Base
|
|
Simply straddle the board between the pins and cut your mortise – perfectly centered every time! Plate is constructed of 1/4 Acrylic with 1-1/2 opening, and is transparent for visibility. Solid brass guides thread easily into 3 different insert settings for a variety of wood thicknesses and for non-centered mortises. Predrilled hole pattern fits: Porter Cable 690/890 series, Makita 1100-1101 series, Bosch 1617-1618 (fixed base only) and Dewalt DW616/DW618. 6-1/2 diameter. 11/16L guide posts.
|
|
Leigh Super 24 Dovetail Jig
|
|
Extraordinary joint making capability at an exceptional price point! Cut variably spaced Through & Half-blind dovetails easily and accurately. Infinitely adjustable one-piece fingers are easily positioned for any joint pattern, and you are always guaranteed a half pin at each edge of the joint. Rout half-blind pin boards and tail boards at the same time. The finger assembly can also produce two sizes of box joints, 5/16” and 5/8”. Adjustments for fit can be made in increments of .002”. You can even install the included crosscut fence and the dovetail finger assembly becomes a sliding dovetail template. Available in three widths: 12”, 18” and 24” to satisfy the needs of every woodworker and every budget.
|
|
Leigh Square Tenon Guides
|
|
Rout tenons with square corners easily and quickly with your Leigh FMT — the perfect solution for traditional exposed tenon joinery. This kit includes all four square tenon sizes: 1/4, 5/16, 3/8 and 1/2. These guides can rout square cornered tenons to match any mortise length up to 5. All square tenons are routed with a 1/2 router bit. Note: New FMT guides not exactly as shown.
|
|
Leigh Louver Door Guides
|
|
Now you can use your FMT to make precise louver doors with standard 1/4 x 1-1/4 louvers at a 45º angle. Matching tenons can be routed on the ends of louver stock or radiused louver stock can be routed to fit the mortise. Sold in left and right matching pairs. Note: New FMT guides not exactly as shown.
|
|
Rockler 45 Degree Chamfer Router Bits
|
|
Cut beautiful 45º chamfers of varying sizes with these high quality bits. Each one has been sharpened with 600-800 grit diamond wheels to guarantee absolute razor sharp performance. They are precision-balanced for smooth operation, and feature a baked on anti-stick coating to resist pitch and resin buildup. From quality design and construction to fair and affordable pricing, these bits meet the lofty demands of Rockler Woodworking and Hardware.
|
|
No Drip Edge Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Roundover Beading Router Bits
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.Includes smaller bearing and wrench for beading applications at no additional charge.Items with * in the description are larger bits that should be used in router tables at reduced RPM.
|
|
Table Top Edge Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Specialty Molding Router Bit
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
Beading Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Cove Router Bits
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
Ogee Fillet Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Classic Cove Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Economy Tongue and Groove Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Ogee Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Rockler Trim Router Bit Kits
|
|
Avoid a tedious setup when you want to trim precise amounts of wood off doors and large panels. These kits use razor-sharp shear-cutting bits along with different bearing combinations to remove exactly 1/16, 1/8, or 3/16 of material in just two router passes—all without a straightedge! Each kit includes one carbide router bit and five bearings to set up the various depths of cut. The Small Bit Kit is perfect for trimming stock up to 1 thick, while the Large Bit Kit can handle doors and panels up to 2 thick.
|
|
Leigh Router Bit Sets for all D Series Dovetail Jigs
|
|
32012 is a 12-piece 8mm shank bit set for all D Series dovetail jigs. Set includes Leigh bit numbers: 50-8, 60-8, 70-8, 75-8, 90, 100, 150, 160, 101-8, 112-8 and 128-8 PLUS a 172-8 1/2 to 8mm collet reducer.34354 is a 16-piece bit set. It includes two 1/2 to 8mm collet adaptors in addition to every 8mm and 1/2 shank bit used with the D4R. The extra strength and stiffness of 8mm shanks makes this bit collection ideal for high-volume professional work and for those who work in hard wood. It's Leigh's most popular set. The boxed set includes Leigh bit numbers: 50-8, 60-8, 70-8, 75-8, 80-8, 90, 100, 101-8, 112-8, 120-8, 128-8, 140-8, 150 and 160.
|
|
Leigh Boxed Router Bit Sets for F2F1 Finger Joint Templates
|
|
38371 is an 11-piece set with two-flute HSS spiral upcut bits (the 162, 163 and 165 are single-flute). Also includes bit #'s 162, 163, 164, 165, 166, 168, 170, 173, 180 and collet reducers 172-8 and 172-375. Storage box included. Leigh set #1618F.38956 is an 11 piece set with two-flute spiral upcut bits in solid carbide that will outlast HSS many times over. The two smallest cutters are not available in solid carbide so we have included carbide tipped straight cutters. The boxed set includes bit #'s 132, 133, 164C, 165C, 166C, 168C, 170C, 173C, 180C and collet reducers 172-8 and 172-375. Storage Box Included. Leigh set #1618C.
|
|
Leigh Boxed Router Bit Sets for F1600 and F2F1 Dovetail Jigs
|
|
34743 is HSS. It's a 7 piece set with double-flute spiral upcut bits (the #162 is single-flute). The boxed set includes bit #'s 162, 164, 166, 168, 173, 180 and 1/2 to 3/8 collet reducer 172-375. Storage Box Included. Leigh item 1606F.32973 is solid carbide. It's a 7 piece set with two-flute spiral upcut bits that will outlast HSS many times over. The smallest cutter is not available in solid carbide so a carbide tipped straight cutter is substituted. Includes bit #'s 162, 164C, 166C, 168C, 173C, 180C and 1/2 to 3/8 collet reducer 172-375. Storage Box Included.Leigh item 1606C.
|
|
CMT Bowl Tray System Bit Set
|
|
Make gorgeous divided bowls quickly and easily. No lathe? No problem. This technique uses a router and a specialized Bowl and Tray router bit. The kit includes two templates, a Bowl and Tray bit, and a collet extension, full instructions and an instructional DVD. The end results will stun your friends with high quality. And what great gifts!
|
|
Freud V Grooving Bit
|
|
Application: Engraving, decorative accents and signs. Ideal for making signs and adding decorative accents to furniture and plaques, Freud's V grooving bits are designed to cut deep or shallow V grooves. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Rockler Bead Cove Bits for Canoe Building
|
|
Now in larger sizes for coopered barrels and curved doors! Exclusive sizes sold only at Rocker!Canoe makers use these bits to make long, seamless joints in the curving hulls of their canoes. Just use half of the bit for the cove, then adjust the router to cut the mating bead. The resulting joint has a “hinging” action that is perfect for any curved element. Our bits are available in the smaller sizes for lightweight canoes, and also with a radius of up to 3/8 for coopered barrels, buckets and bowfront doors. The entire bit can also be used as an attractive decorative edge or molding profile.
|
|
Freud Cove and Bead Groove Bits
|
|
Application: Ornamental edge profiles and grooves. Produce beautiful decorative grooves in molding and furniture with these bits or use them with an edge guide to create decorative edge profiles. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Freud Stacked Slotting Set
|
|
Application: Producing grooves 1/8 to 23/32 wide. By changing the bearings this set will cut three different depths (1/4, 3/8, 1/2). Set includes Freud's slotting cutter arbor 60-202, 3 bearings and 4 specially designed slotting cutters. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Dovetail Jig Stand
|
|
This handy stand raises your dovetail jig to a more comfortable height, providing greater visibility, superior ergonomics and less fatigue. The integral guide rails provide a sliding surface for your shop-made drawer, creating the perfect place to store your dovetailing accessories.
|
|
Rockler Inlay System
|
|
A well-placed inlay, or series of inlays, can bring a project to a whole new creative level—and our simple system makes it faster and easier than ever. The clear acrylic frame holds the inlay template in place and gives your router a stable surface to run on, while the spiral bit, template guide and removable bushing allow you to cut both the inlay and recess with the same template. The system includes a blank acrylic template insert that you can custom-cut to your liking. Plus, we have several pre-fabricated patterns, sold separately below. The Oval and Butterfly Key Sets contain inserts for seven different sized inlays, while the Poker Set has one for each suit.
|
|
4 Piece Poker Inlay Set
|
|
Create the perfect accent for poker tables, card boxes, cabinet fronts, and more! Designed to work with the Rockler Inlay System, this set of 4 x 6 clear acrylic inserts is the easiest way to add professional-looking decoration to your card-themed projects. Each insert features horizontally and vertically centered guidelines for simple and accurate positioning. Finished inlays measure 3-1/2 wide by 4-1/4 high.
|
|
Butterfly Key Inlay Template Set
|
|
This time-honored inlay design (also known as Bow-Tie or Dutchman) works great for everything from decoration to joint reinforcement! Designed to work with the Rockler Inlay System, this four-piece set contains 4 x 6 clear acrylic inserts with patterns for seven different sized inlays. Each insert features horizontally and vertically centered guidelines for simple and accurate positioning. Finished inlays range in size from 1 W x 1-5/8 H to 4-1/2 W x 5-3/4 H.
|
|
Oval Inlay 4 Piece Set
|
|
The understated oval inlay looks great in a huge variety of projects! Designed to work with the Rockler Inlay System, this four-piece set contains 4 x 6 clear acrylic inserts with patterns for seven different sized inlays. Each insert features horizontally and vertically centered guidelines for simple and accurate positioning. Finished inlays range in size from 1 W x 1-1/2 H to 4-1/2 W x 5-3/4 H.
|
|
Freud Dish Carving Bit
|
|
Application: Trays, coasters, and signs. This bit is designed to remove large amounts of wood. Excellent for making trays, coasters, and raised-letter signs. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Freud Four Piece Undersized Plywood Bit Set
|
|
Application: Creates perfectly fitted grooves and dadoes. Designed to cut today's undersized plywood; ideal for 1/4 to 3/4 plywood.Set comes in Freud’s unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
|
|
Freud 13 Piece Super Bit Set
|
|
Application: Offers a mix of woodworkers' favorite bits, including “V” grooving, flush trimming, chamfering and dovetailing. All bits have 1/2 shanks.Set comes in Freud’s unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
|
|
Rockler 3Pc RoundoverBeading Bit Set
|
|
Consists of the most commonly used roundover bits. Comes with three bearings to convert bits to beading bits.Save more than $10 versus buying the bits separately!
|
|
Train Track Router Bits
|
|
These carbide-tipped bits let you create classic wooden toy train tracks, similar to the expensive store-bought track.Double groove bit cuts both track grooves in a single pass.Use single groove bit for curved track sections.1/2 shanks.White Birch, Maple or European Beech stock recommended.Click here for your FREE Downloadable Train Track Plan
|
|
Freud Six Piece Starter Bit Set
|
|
Application: Includes a variety of profiles ideal for the beginning woodworker. Enables a novice woodworker to be very creative with a minimum investment.Set comes in Freud’s unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
|
|
Freud Five Piece Cabinet Bit Set
|
|
Application: Produce your own cabinet doors at a fraction of the cost of shaper heads. All bits have 1/2 shanks and are designed to be used on 3/4 stock.Includes attractive wooden storage box.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers with 1/2 shank.
|
|
Freud Three Piece Cabinet Bit Set
|
|
Application: Produces perfect fitting rail and stile doors from 3/4 stock.Cabinet bit sets combine the most popular rail and stile bit sets with one Quadra-Cut raised panel bit, in either a backcutter or no backcutter design. Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. All bits have 1/2 shanks and are designed to be used on 3/4 stock.Includes attractive wooden storage box.Cuts all composition materials, plywoods, hardwoods, and softwoods.
|
|
Freud Classical Roman Ogee Bit
|
|
Application: Decorative edging for cabinets,molding and furniture. Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted routers.
|
|
Freud Ogee Bit
|
|
Application: Decorative edging for cabinets,molding and furniture. Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted routers.
|
|
Freud Convex Edge Bit
|
|
Application: Shallow bull nose profile for edging. This bit creates a soft, gently rounded edge on any project or use this bit to plunge route internal cut-outs for use as hand-holds. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Freud Corner Beading Bit
|
|
Application: Beams, posts, railings and fine furniture. Adds an attractive bead to beams, posts, railings, and millwork. Ideal for accenting square table legs. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Divided Lite Cabinet Door Bit Set
|
|
Application: Produces cabinet doors with stylish glass panesBuild beautiful glass panel doors with classic multiple pane styling.The perfectly matched bits mill profiles for stiles, rails, mullions and muntins that allow you build strong mortise and tenon joints.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers.
|
|
Freud RoundOver Table Edge Handrail Bits
|
|
Application: Attractive edging of tables, plaques and handrails. Produces sturdy, attractive handrails for staircases. Combine with another rail profile to create a custom railing design. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Variable Corner Round Bit
|
|
Application: Rounding two edges in one pass. The Freud variable corner round bit saves you time by rounding both edges on a board in one pass, rather that using standard rounding over bits that require two passes. Works with stock from 7/16 to 1-/1/4 thick. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Leigh Joint Guides for the FMT
|
|
Rout a huge variety of mortise and tenon joints with this selection of joint guides and your FMT Mortise and Tenon Jig.
|
|
Leigh M2 Multiple Mortise and Tenon Attachment
|
|
Cut rows of perfectly fitted mortise and tenon joints! Leigh's M2, Multiple Mortise and Tenon Attachment brings multiple mortise and tenon joints within easy reach of any woodworker who owns a D4 Dovetail Jig and a plunge router with 1/2 collet. The adjustable guide fingers let you cut multiple joints in virtually any layout, in stock up to 24 wide. Mortises and tenons can be cut in sizes from a delicate 5/16 x 5/8 to a muscular 1-1/2 x 2-1/2. The M2 can also be used as a custom finger joint jig for producing large scale, variably spaced finger joints from 5/8 wide on up, in stock up to 1-1/8 thick. The M2 guide fingers can also be used to produce extra-large variably spaced half-blind dovetails with tails up to 1-1/4 deep.
|
|
Leigh Isoloc Joint Templates
|
|
By removing the Dovetail finger assembly and simply sliding on one of the three Isoloc templates, you are ready to produce some extraordinary joinery. Each template features two different joint patterns, one design carefully CNC machined on each side. A single 5/16 or 8mm straight bit, preferably an upcut spiral, does all the cutting. Joint fit is easily adjusted in increments of 0.001 with a turn of a barrel.
|
|
Leigh Jig Accessory Kits
|
|
The AC 12, AC 18 and AC 24 are accessory kits for the Super 12, 18 and 24 Dovetail Jigs. All include the appropriately sized VRS Vacuum and Router Support system for dust-free routing and the 7-piece Leigh router bit set. The 7-piece bit set includes all of the extra 8mm shank bits used with Super Jigs. The extra strength and stiffness of 8mm shanks allows faster smoother routing and is ideal for those who work in hard wood. The boxed set includes Leigh bit No.s 50-8, 60-8, 70-8, 75-8, 101-8, 112-8, and 128-8.
|
|
VRS Vacuum and Router Support for the Leigh Dovetail Jigs
|
|
Leigh’s NEW VRS system (Vacuum and Router Support) will make your dovetail routing a dust-free experience. The vacuum chute is easily attached to any Leigh jig and glides effortlessly from side to side on nylon rollers. It automatically follows the router when routing the joint or when the router is parked off to the side, which means it’s always in the perfect position to catch the chips. Each VRS comes complete with two adaptors to fit all popular vacuum hose sizes from 1 to 2-1/2. Can be used with a small shop vac or large built in system. Comes complete with all mounting hardware needed for any Leigh 24” D Series jig or the Leigh D1600.
|
|
Freud Reversible Glue Joint Bit
|
|
Application: Providing a stronger joint by increasing the surface area for glue Plane boards to a uniform thickness; align bit to the center of the board, then reverse each board for a perfect glue joint. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers, as well as table-mounted portable routers.
|
|
Freud Wide Crown Molding System Create up to 9 Different Profiles
|
|
Crown molding is the perfect way to transform a room, giving height and elegance to an otherwise ordinary ceiling. But commercially manufactured wide crown molding is expensive, hard to find, and the selection of available wood species is very limited. Now, thanks to Freuds unique Wide Crown Molding bits, woodworkers can mill their own 5-1/2 wide Crown Molding economically and in their choice of wood and profile. These bits are the only router tooling capable of producing such wide crown molding, and they also feature a carefully designed shape that lets you mix and match profiles to produce precisely the shape you need up to nine different profiles from only six bits! Mill 5-1/2 wide crown molding from almost any hardwood or softwood. Mix and match bits for upper and lower profiles to produce nine different designs. Use only in a router table with minimum 6 high fence, mill in 3 or more passes. Use featherboards and hold downs to hold stock down against the fence. Use pusher blocks or a push stick to feed stock. Make test cuts in scrap stock first.
|
|
Freud Chair Rail Bits
|
|
Application: Creates standard # 390 decorative chair rail profile. Chair Rail adds a beautiful horizontal detail to any room in the home or office. Choose your favorite wood, and perfectly match the very popular # 390 chair rail design. Use with hardwood or softwood to mill stain grade molding. Use with table mounted, CNC or automatic routers. Note: For best results make two or more passes.
|
|
Freud Base Molding Bits
|
|
Application: Mill base or traditional boards in any width. Ideal for renovators who need to match old, extra-high base moldings. Bits can be used to rout base cap only, or to profile the edge of wide base molding. Choose your favorite wood to suit the room. Use with hardwood or softwood to mill stain grade molding. Use with table mounted, CNC or automatic routers. Note: For best results make two or more passes.
|
|
Freud QuadraCut Bevel Raised Panel Bits
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and moldingRevolutionary Quadra-Cutdesign combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish. Use 1/2 height for 5/8 stock. Use 5/8 height for 3/4 stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Freud QuadraCut Bevel Raised Panel Bits with Backcutters
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.Application: Producing panels from 3/4 stock that are flush with the doorframe for a professional, architecturally correct appearance Exclusive Quadra-Cut design combines a backcutter with the smooth cuts of Freud's 2+2 RaisedPanel Bits. Shims are included to allow adjustment of tongue thickness from 7/32 to 1/4 for maximum versatility and compatibility. Patented design allows these bits to produce a full 1-1/2 wide reveal for traditional raised panel doors. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Freud MultiProfile Bits
|
|
Application: One bit produces numerous designs for face, corner and crown molding. Thick carbide tips and a sturdy 1/2 shank allow you to produce countless molding profiles. Produce an endless number of profile designs by varying the height and fence settings and making multiple passes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Wedge Tongue Groove Bits
|
|
Application: Joining boards for wide panels such as table tops. Provides a strong joint, due to the increased glue area. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Freud Lock Miter Bits
|
|
Application: Creating interlocking corner joints. Run one board vertically and the piece to be joined horizontally. 99-035 cuts thinner panels for projects such as humidors and jewelry boxes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers, as well as table-mounted portable routers.
|
|
Freud V Panel Bit Set
|
|
Application: Creating attractive Groove paneling Set includes spacers that allow you to produce V paneling from 1/2, 3/4, or 1 thick stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Freud Drawer Lock Bits
|
|
Application: Forming a strong joint between the sides and front of a drawer Drawer fronts are formed horizontally, flat on the table surface. Drawer sides are formed vertically against the fence of the table. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Freud Round Edge Matched Rail Stile Bit Sets
|
|
Application: Produces perfect fitting rail and stile doors from 3/4 stockProduce flawless raised panel doors when you combine these bits with one of Freud's Raised Panel Bits. Shims are included to ensure a perfect fit.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers.
|
|
Dovetail Template Master
|
|
Make as many dovetail jigs as you want with this innovative template.
|
|
Undersized Router Bits
|
|
Specially designed to cut grooves and dadoes for plywood that measures less than its stated nominal thickness.
|
|
Rabbeting Router Bits
|
|
Rockler rabbeting router bit includes bit and bearings for 5/16', 3/8', 7/16' and 1/2' rabbets. Allen wrench included. Vary cutting depth by changing bearings.
|
|
Solid Carbide Signmaking Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
3 Wing Slotting Cutters Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Hinge Mortising Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Core Box Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
VGroove Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Dovetail Router Bits
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
Distinctive Series Dovetail Templates Style B
|
|
Create variably spaced dovetails for more visual interest and a fine, hand-cut look — no need to adjust your spacing! These templates have preset spacing for 4, 5, 7 and 10 widths. Setup is easy as can be; just install the templates and start routing. Compatible with the current Rockler Dovetail Jig (22818). Includes templates, knobs and T-bolts.
|
|
Distinctive Series Dovetail Templates Style A
|
|
Easily create wide dovetails with narrow pins for that fine, hand-cut look. These templates have preset spacing for 4, 6, 8 and 10 widths. Setup is easy as can be; just install the templates and start routing. Compatible with the current Rockler Dovetail Jig (22818). Includes pin template, tail template, knobs and T-bolts.
|
|
Router SignPro8482 Signmaking Template Kit
|
|
Make signs up to 36 long the fast, fun and easy way. New and improved design allows you more versatility and ease of use - you can even make signs with vertical numbers! Ideal for putting your house address on the mailbox post. Features low profile C-clamps/end caps for end-to-end routing, stronger metal rails, and metal-nosed bushings that change easily without any tools.
|
|
Small Router Bit Case
|
|
Solid wood cases firmly hold 1/4' and 1/2' shanked router bits for easy carrying and convenient storage. Bits won't rattle traveling from job site to job site.Bits not included.
|
|
14 BeadLOCK Tenon Bit
|
|
Save money by making your own Beadlock loose tenon stock — just raid your scrap bin for material. We now offer Beadlock bits in all three sizes: 1/4, 3/8 and 1/2. All feature precision-machined carbide flutes for a perfect match to your Beadlock mortise, and sturdy 1/2 shanks for minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock Router Bits, the choice is yours!
|
|
Specialty Molding Router Bit
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
45 Lock Miter Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Bead Stile and Rail Router Bit Set
|
|
Stile and rail router bits for beautifully crafted frames. Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Classical Stile and Rail Router Bit Set
|
|
Stile and rail router bits for beautifully crafted frames. Rockler stile and rail bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints.
|
|
Round Stile and Rail Router Bit Set
|
|
Stile and rail router bits for beautifully crafted frames. Rockler stile and rail bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints.
|
|
Turnlock Baseplate and Metal Bushing Set
|
|
Just push in and twist — that’s how simple it is to install bushings in the Turnlock baseplate. There’s no need to mess with threaded nuts, and no need to remove the router base. Plus, the bushings in this set now feature metal collars for greater durability and resistance to impact. Baseplate is pre-drilled for a huge variety of routers. Includes 7 Turnlock baseplate, centering pin, bushing adapter for standard thread-on bushings and 8 Turnlock bushings: 5/16, 3/8, 7/16 (short), 7/16 (long), 1/2, 5/8 (short), 5/8 (long) and 51/64 OD.
|
|
Freud QuadraCut Roman Ogee Bits
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Decorative edging for cabinets,molding and furniture. Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted routers
|
|
Freud QuadraCut Ogee Fillet Bits
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Ogee fillet bit applications: Decorative edging for cabinets,molding and furniture. Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted routers
|
|
Freud QuadraCut Ogee Double Fillet Bits
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Ogee double fillet bit applications: Decorative edging for cabinets,molding and furniture. Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted routers
|
|
Freud QuadraCut153 Ogee Raised Panel Bits with Backcutters
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.Application: Producing panels from 3/4 stock that are flush with the doorframe for a professional, architecturally correct appearance Exclusive Quadra-Cut design combines a backcutter with the smooth cuts of Freud's 2+2 RaisedPanel Bits. Shims are included to allow adjustment of tongue thickness from 7/32 to 1/4 for maximum versatility and compatibility. Patented design allows these bits to produce a full 1-1/2 wide reveal for traditional raised panel doors. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Bench Dog ProLift Router Adjustment System
|
|
You'll love this lift's range, speed and accuracy! With 0.001 adjustment resolution, it allows for absolute precision with the naked eye. Enjoy unmatched linear motion speed and convenient features. Raise the collet above the table for easy bit changes of any size. And with heavy-duty bronze bushings and a nickel-plated surface finish, the ProLift is designed to withstand demanding daily use. Integral fins keep your router running cool, while the direct-drive mechanism eliminates the complication and slop associated with belts, chains and gears. Compatible with ALL Bench Dog Router Tables (and all NEW Rockler Router Tables). If you're looking for a powerful lift that moves faster and lasts longer, this is it!
|
|
Rockler Cove Raised Panel Bit
|
|
This bearing guided bit produces the fielding on door panels for stile and rail construction. 3-1/2 diameter, 5/8 cutter length, 1/2 shank, 2 shank length.
|
|
Rockler Ogee Reversible Rail Stile Bit
|
|
Make perfect professional looking cabinet doors every time. Use this cutter to make square edge or arch pattern doors without a fence. One bit cuts both the rail and stile profiles; simply remove the heads and reverse the positions. Available in chamfer, traditional, or classical styles. 1-5/8 diameter, 15/16 cutter length, 1/2 shank, 1-1/2 shank length, 22mm bearing.
|
|
Classic Ogee Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Classic Roman Ogee Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Rockler Flush Trim Bits for Plunge Routers
|
|
Bearing guide is located on the shank side of the blade, and has the same diameter as the blade, making this the perfect choice for template work when the template is above the worked material (if using a hand-held router in the conventional way). Available in three sizes. Click More Info Tab for specific dimensions.
|
|
Complete Dovetail Jig and 3 Templates Internet Only Deal
|
|
Save $69 on this special package!Create beautiful, traditional-looking dovetails without the time-consuming layout or the need to fuss with a complicated jig. Our Complete Dovetail Jig allows you to cut half-blind dovetails from 1/2 to 1-1/4 thick and through dovetails from 3/8 to 3/4 thick. And with the three Distinctive Series Dovetail Templates, you can craft a variety of pin/tail patterns. The templates feature preset spacing to make setup as easy as can be; just install the templates and start routing. Dovetail Jig Special Offer comes with:Rockler Complete Dovetail Jig (22818)Distinctive Series Dovetail Templates (Styles A, B and C) to create variably spaced dovetails Two durable phenolic standard templates for Half-Blind and Full-Through dovetailsThree 8mm shank carbide-tipped router bits (1/2 x 14 dovetail, 1/2 x 8 dovetail, 5/16 straight)1/2 to 8mm collet adapter7/16 guide bushing fits most routersDetailed eight-page instruction bookletQuick reference guide for standard joints
|
|
Special Molding Router Bits
|
|
Ideal for specialized sizes and for matching unique species.
|
|
Rockler Dovetail Setup Jig
|
|
Easily set the height of the bit and set the back fence for the Rockler Dovetail Jig (works with either 62525 or 23882).Significantly reduces setup time for setting the dovetail bit and fence.Reference markings on sides in 1/16 increments.
|
|
Leigh 7Piece Router Bit Set
|
|
Get high quality bits for your high quality jig. Designed for use with Leigh Super Jigs, this boxed set features 7 carbide tipped bits, each honed with 600 grit diamond wheels for superbly smooth, efficient cutting. 8mm bit shanks are 1-3/4 long to extend through the thickness of the guide fingers. Set includes 4 Through Dovetail bits (1/4, 5/16, 3/8', and 7/16), and 3 Half-blind bits (10º, 12º, and 18º). Buy the set and save over individual bit prices.
|
|
Leigh 7Piece Router Bit Set
|
|
Get high quality bits for your high quality jig. Designed for use with Leigh Super Jigs, this boxed set features 7 carbide tipped bits, each honed with 600 grit diamond wheels for superbly smooth, efficient cutting. 8mm bit shanks are 1-3/4 long to extend through the thickness of the guide fingers. Set includes 4 Through Dovetail bits (1/4, 5/16, 3/8', and 7/16), and 3 Half-blind bits (10º, 12º, and 18º). Buy the set and save over individual bit prices.
|
|
Raised Panel Router Bit Straight
|
|
Horizontal and Vertical raised panel bits manufactured to Rockler's exacting standards. Use vertical bits for straight panels; horizontal bits cut both straight and curved panels.
|
|
Raised Panel Router Bit Ogee
|
|
Available in Horizontal and Vertical. Both have a 1/2' shank. Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Raised Panel Router Bit Cove
|
|
Horizontal and Vertical raised panel bits manufactured to Rockler's exacting standards. Use vertical bits for straight panels; horizontal bits cut both straight and curved panels.
|
|
Roman Ogee Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Hanging Slot Router Bits
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Drawer Lock Router Bits
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
|
|
Distinctive Series Dovetail Template Style C
|
|
Easily create beautiful dovetails with large uniformly sized pins and tails. This template has preset spacing for 4, 6, 8 and 10 wide workpieces. Setup is simple as can be; just install the template and start routing. Compatible with the current Rockler Dovetail Jig (22818). Includes pin template, tail template, knobs and T-bolts.
|
|
24 PorterCable Omni Dovetail Jig
|
|
Enjoy the same innovative features of the 16” Omni Jig on a larger scale and with even more capability. Cut variable-spaced half-blind and through dovetails with the 24 adjustable-finger template which allows you to set the position and width of the pins for whatever joint you choose. A convenient “Recipe” card outlines everything you’ll need for a particular material thickness and application. Includes everything accompanying the 16 jig, plus 3 additional template guides. And with the optional half-blind template, you can cut gorgeous half-blind and sliding tapered dovetails in a single pass (see More Info for details).
|
|
Freud Cove Vertical Raised Panel Bits
|
|
Application: Creates full sized raised panels by feeding 3/4 stock verticallySmall overall diameter makes these bits ideal for lower horsepower routers and single speed routers. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Freud Ogee Vertical Raised Panel Bits
|
|
Application: Creates full sized raised panels by feeding 3/4 stock verticallySmall overall diameter makes these bits ideal for lower horsepower routers and single speed routers. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
16 PorterCable Omni Jig Dovetail Jig
|
|
Cut precise, accurate dovetail joints in less time, every time with this innovative joinery system. New “Set & Forget” template-alignment stops ensure the jig’s stability during a cut. You’ll enjoy unmatched repeatability and fewer test cuts. Cut half-blind dovetails in a single pass with the fixed-space template, which also works to create rabbeted half-blind and sliding-tapered dovetails. The color-coded on-board instructions are easy to understand for fewer trips to the user manual. Convenient router-bit depth gauges let you set bit depth without measuring. Plus, the system arrives pre-assembled and factory-set, so you’ll be cutting dovetails in no time. And with additional templates (sold separately; see More Info tab for details) you'll be able to easily create variable-spaced half-blind and through dovetails, miniature dovetails and box joints.
|
|
Freud Face Molding Bit
|
|
Application: Door casings, trim, baseboards, and pilasters. Add architectural detail to your furniture, cabinets and millwork. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Small Piece Holder
|
|
Get an extra margin of safety and control when working with small pieces.
|
|
Shear Cutting Flush Trim Bits
|
|
Instead of chopping at the wood fibers at a 90 angle, the shear angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain or cross-grain on hardwoods.
|
|
Freud Ogee Matched Rail and Stile Bit Sets
|
|
Application: Produces perfect fitting rail and stile doors from 3/4 stockProduce flawless raised panel doors when you combine these bits with one of Freud's Raised Panel Bits. Shims are included to ensure a perfect fit.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers.
|
|
Freud Bead Edge Matched Rail and Stile Bit Sets
|
|
Application: Produces perfect fitting rail and stile doors from 3/4 stockProduce flawless raised panel doors when you combine these bits with one of Freud's Raised Panel Bits. Shims are included to ensure a perfect fit.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers.
|
|
Freud Bevel Edge Matched Rail and Stile Bit Sets
|
|
Application: Produces perfect fitting rail and stile doors from 3/4 stockProduce flawless raised panel doors when you combine these bits with one of Freud's Raised Panel Bits. Shims are included to ensure a perfect fit.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers.
|
|
Spiral Mortising Router Bits
|
|
This Onsrud spiral router bit is perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide.
|
|
Freud Finger Pull Door Lip Bit
|
|
Application: Creating the finger pull found on popular contemporary cabinet doorsCuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
38 BeadLOCK Tenon Bit
|
|
Save money by making your own Beadlock loose tenon stock — just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 3/8 widths for a perfect match to your 3/8 Beadlock mortise. Its sturdy 1/2 shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock Router Bits, the choice is yours!
|
|
12 BeadLOCK Tenon Bit
|
|
Save money by making your own Beadlock loose tenon stock — just raid your scrap bin for material. We now offer Beadlock bits in all three sizes: 1/4, 3/8 and 1/2. All feature precision-machined carbide flutes for a perfect match to your Beadlock mortise, and sturdy 1/2 shanks for minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock Router Bits, the choice is yours!
|
|
Freud QuadraCut153 Rounding Over Bits
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.Rounding over bit applications: Soften furniture edges and create decorative rounded edges. Use rounding over bits to soften furniture edges and to create decorative rounded edges.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
|
|
Freud QuadraCut Beading Bits
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.Beading bit applications: Createdecorative bead edges. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
|
|
RoutACorner Templates
|
|
Great for all projects too large or awkward for table saws or band saws.
|
|
Durable 38 Thick Polycarbonate
|
|
The strength needed for router bases. Can withstand extremely high impact. Can be cut, drilled and routed.
|
|
16 and 24 Dust Shrouds
|
|
These shrouds work with the 16 and 24 Omni Jig Joinery Systems to control the large amount of sawdust generated by cutting dovetails. They attach quickly to the jig and direct chips and dust to a single point underneath the jig for efficient collection.
|
|
4210 PorterCable 12 Dovetail Jig
|
|
This well-built, straightforward jig allows for cutting half-blind, rabbeted half-blind, and sliding dovetails. Its patented alignment lines and router bit depth stop improve accuracy and make setup quick and easy, while heavy duty cam-type clamps with sandpaper-backed locking bars hold the workpiece firmly in place. The jig accommodates stock from 1/4 to 1-1/8 thick and includes a 1/2 shank, carbide-tipped dovetail bit. Additional templates, sold separately, are available to create through dovetails, box joints and miniature dovetails (see More Info for details).
|
|
Louver Router Bit
|
|
Simulate the beauty of louver doors, shutters, or panels with your router and this exclusive heavy-duty bit. As long as you have a sub-fence on your router table and featherboards to hold the stock in place, it’s simple to produce beautiful, clean 2-13/16 molding. The 1-1/4 diameter, 3 tall bit features a top bearing for easy reference during the final pass, as well as a sturdy 1/2 steel shank.
|
|
Bench Dog Zero Clearance Insert
|
|
Use this zero clearance insert with small bits and small pieces of stock. Prevents small stock from falling into the router bit opening. Resists melting and won’t harm your router bits. Fits all ProLift and ProPlate Aluminum models.
|
|
Bench Dog Guide Bushing Adapter for Porter Cable
|
|
That’s right, template routing on the router table! Fits Porter-Cable type guide bushings. Comes with centering cone, adapter and hardware. Fits all Bench Dog Tools ProLift and ProPlate Aluminum models.
|
|
Rockler One Plate Universal Router Plate
|
|
The last router baseplate you’ll ever need! The Rockler One Plate’s innovative modular design accepts Rockler’s interchangeable Inter-Loc inserts, making this the most versatile baseplate on the market. Just attach the appropriate ABS plastic insert to the 1/4' thick circular aluminum frame to handle template routing, standard routing, or oversized bits. Plus, the One Plate is the only baseplate that will accept Rockler’s new Whirlwind Dust Port for dust-free edge routing. It is pre-drilled to fit a huge selection of the most popular routers on the market (click “More Info” to see the complete list), and can easily be custom drilled to fit other models. The One Plate includes the heavy-duty aluminum plate, all necessary mounting hardware, and an Inter-Loc insert ( 1-1/4' opening) that accepts standard 1-3/8' guide bushings for template routing. Additional inserts are available for standard bits, zero-clearance routing, and oversized bits. The inserts fit the One Plate as well as standard
|
|
Whirlwind Dust Port
|
|
Designed as an accessory to Rockler’s new One Plate router baseplate, this innovative two-piece system contains dust both above and below the bit for mess-free edge routing. The unique top attachment surrounds bit from above, creating a visible whirlwind effect that forces dust down into the larger lower component. The top-piece attaches completely tool-free to the included Inter-Loc baseplate insert. The lower attachment mounts quickly and easily to pre-drilled holes in the Rockler One Plate (Note: the Whirlwind Dust Port is not compatible with other baseplates). Includes mounting screws.
|
|
Freud QuadraCut Ogee Raised Panel Bits
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and moldingRevolutionary Quadra-Cutdesign combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish. Use 1/2 height for 5/8 stock. Use 5/8 height for 3/4 stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Freud QuadraCut Cove Raised Panel Bits
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and moldingRevolutionary Quadra-Cutdesign combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish. Use 1/2 height for 5/8 stock. Use 5/8 height for 3/4 stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Freud QuadraCut Cove Raised Panel Bits with Backcutters
|
|
Freud's exclusive Quadra-Cut 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.Application: Producing panels from 3/4 stock that are flush with the doorframe for a professional, architecturally correct appearance Exclusive Quadra-Cut design combines a backcutter with the smooth cuts of Freud's 2+2 RaisedPanel Bits. Shims are included to allow adjustment of tongue thickness from 7/32 to 1/4 for maximum versatility and compatibility. Patented design allows these bits to produce a full 1-1/2 wide reveal for traditional raised panel doors. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Rockler 4Pc Straight Bit Set
|
|
Get maximum performance with Rockler’s top quality router bits!Includes the most commonly used straight router bits.Save more than $6 versus buying the bits separately.Comes in convenient storage box.
|
|
4 Piece 8mm Dovetail Router Bit Upgrade
|
|
These 8mm shank dovetail router bits are 25% larger than 1/4 bits and reduce chatter.Includes 1/2 x 14° and 8° dovetail bits, 5/16 straight bit, and 1/2 to 8mm collet adapter. Fit all existing Rockler dovetail jigs
|
|
Safety Power Tool Switch
|
|
No need to panic with our hands-free panic button. Just bump the “Stop Paddle” to quickly shut off power. Large, bright paddle is easy to find when you’re in a tight spot. Locate it near your hip or knee and you’ll never have to take your hands off the workpiece. Great for use with router tables or any workbench where you use a stationary power tool.
|
|
Solid Carbide 7 Bevel Trim Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Freud Finger Joint Bit
|
|
Application: Joining wood edge-to-edge or end-to-end Produces a joint that is stronger than the wood itself. Tips on each side of the bit are offset, cutting twice as many fingers as you see tips on each side of the bit. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as table-mounted portable router.
|
|
Freud Biscuit Joining Set
|
|
Application: Creating perfect slots for biscuit joining Easy and economical way to join wood. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Window Sash Rail Bits
|
|
Application: Two bits work together to produce a complete divided lite sash99-050 copes the rails, sash bars and muntins, while 99-051 cuts the profile on all components. Includes instruction manual. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Door Lip Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Freud Rail Stile Profile Bits
|
|
Application: Creates rail and stile doors matched reverse profiles 99-060 and 99-061 bits cope and stick cut the rails and stiles, and also can be used alone to form a matching edge profile. 99-062 cuts the panel slot and the back of the tongue on the coped piece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud No Lip Door Edge Bit
|
|
Application: Create a decorative inverted Ogee Profile on the face of door frontsDesigned to compliment the profile formed on the face of the door created by the Freud 99-064 Finger Pull Door Edge Bit. Precise shear angles provide a splinter-free finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Finger Pull Door Lip Bit
|
|
Application: Creating the finger pull found on popular contemporary cabinet doorsCuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Back Cutter Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Drawer Pull Router Bit
|
|
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Traditional Stile and Rail Router Bit Set
|
|
Stile and rail bits for beautifully crafted frames. Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
|
|
Bench Dog ProPlate Router Plate and Base Enlarger
|
|
ProPlates are the perfect way to enlarge your router's base. Each one of these 8-1/4 x 11-3/4 x 3/8 plates is machined on CNC mills for optimal accuracy. All of them include instructions and a drilling template (should drilling be required). The pre-drilled models all include mounting hardware for easy use. Choose from three materials and numerous bit-hole patterns to get exactly what you need!AluminumAll three aluminum models are hard coat anodized for extreme wear resistance and include two router bit reduction rings, a starting pin, an anti-vibration shim, router mounting hardware and instructions. Available undrilled or pre-drilled for either Group 1 or Group 2 routers (see More Info for Group lists). All three models feature 2, 2.6, and 3.6 bit holes. PhenolicPhenolic ProPlates are a sensible choice for most applications. They are tough, resistant to sag and economical. Available blank, undrilled with 2 or 3.6 bit holes, or pre-drilled for either Group 1 or Group 2 routers with your choice of either 2 or 3.6 bit holes.Acrylic The acrylic plate is designed for use with a Porter-Cable style guide bushing (PCGB), making it perfect for use with dovetail jigs, as well as for enlarging your router’s sub-base. The transparent plate is ideal for freehand work. It is pre-drilled to fit Group 1 routers.
|
|
Freud Adjustable Tongue Groove Bit Set
|
|
Application: Producing perfectly fitted tongue and groove joints for projects such as Shaker style cabinet doors. Exclusive Freud design features a tongue cutter with opposing shear angles to ensure a flawless finish. Adjustable at .002 inch increments for stock thickness of 1/2 to 1-1/4 and groove widths of 7/32 to 3/8. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
12 Convex Edging Router Bit
|
|
Make your own model log home parts.
|
|
Bosch Colt8482 Palm Router Subbases
|
|
Allows you to easily follow intended cut line when using jigs, templates and other fixtures. Available for standard templates guides or Bosch template guides.
|
|
RouterLoc Router Bit Holder
|
|
Keeps you bits organized and in reach. Holds up to ten 1/4' of 1/2' shank bits! Mounts to a shelf , wall, or side of a router table so your bits are always handy. Semi-locking mechanism ensures that bits won't fall out.
|
|
Finger Joint Router Bit
|
|
Create maximum gluing surface area for superior edge or end joining strength.
|
|
Bearing Lubricant
|
|
Extends the life of bearing mechanisms by repelling dirt and mechanisms by repelling dirt and moisture. Does more than just lubricate it protects and seals the tooling surface while eliminating heat build-up. Penetrates bearings and extends their life by keeping them clean and lubricated. You’ll get smoother, faster, easier routing plus a better project!
|
|
Router Depth Gauge
|
|
Easy and accurate depth adjustments from 1/16' to 1-1/2' .
|
|
Router Bit Case
|
|
Store and organize your bits. Includes inserts for 1/4' or 1/2' shanks to let you make a custom set!
|
|
Reversible Sash Door Assembly Router Bit
|
|
Make your own windows or glass-panel doors with ease!
|
|
1125 Chamfer Router Bit
|
|
Each bit has just the right 'degree' of angle to create the number of segments desired.
|
|
15 Chamfer Router Bit
|
|
Each bit has just the right ' degree' of angle to create the number of segments desired.
|
|
225 Chamfer Router Bit
|
|
Each bit has just the right ' degree' of angle to create the number of segments desired.
|
|
30 Chamfer Router Bit
|
|
Has just the right ' degree' of angle to create the number of segments desired.
|
|
Drawer Lock Router Bit
|
|
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Drawer lock bits are designed especially for joining drawer sides to drawer fronts.
|
|
Rockler Wedge Tongue and Groove Bit
|
|
Stronger than dowels and biscuits, the tongue and groove joints you'll cut with this bit are perfect for edge-joining panels, table tops, or any other glue-up project. 1-1/2 diameter, 1-3/16 cutter length, 1/2 shaft, 1-1/2 shaft length.
|
|
Freud Glass Panel Cabinet Door Bit Set
|
|
Application: Creates top quality strong, tight-fitting glass panel door joints with ease and accuracyExtra strong rail and stile joints with a unique lock in the stile and rail joint, plus significantly more gluing surface. No other set on the market provides this feature. Easy time saving set-up improves accuracy and increases profitability for the professional. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Freud OnePiece Rail Stile Bits
|
|
Application: A simple, efficient method for creating beautiful cabinet doors without having to reconfigure or change cutters or fence settingsCuts all frame members face down so variations in stock thickness are not a problem. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Freud Bevel Vertical Raised Panel Bits
|
|
Application: Creates full sized raised panels by feeding 3/4 stock verticallySmall overall diameter makes these bits ideal for lower horsepower routers and single speed routers. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
|
|
Freud Crown Molding Bits
|
|
Application: Elaborate crown moldings Customize your decorative crown moldings to add elegance to any room. Simply adjust the height of your cut to change the entire profile. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers and table-mounted portable routers.
|
|
Rockler Classical Plunge Bits
|
|
Roman Ogee in essence, this profile's radiused bottom gives a positive-negative effect to the cut shape of successive passes. It is also very decorative if used in a single pass. With twin flute cutters, it is a great option for edge moldings or to give a panel effect in cabinet work on doors and drawer fronts. Available in 4 sizes. Click More Info tab for specific dimensions.
|
|
Rockler Classical Pattern Bit
|
|
Based on a miniature Roman Ogee design, this profile can be used in successive cuts for an astragal style, or in single cuts for a flat bottom trench with profiled sides. Available in two sizes. Click More Info tab for specific dimensions.
|
|
Rockler French Traditional Router Bit
|
|
Two flutes to cut a traditional table edge molding in the ogee style. 1-1/2 diameter, 5/8 cutter length, 1/2 shank, 1-1/2 shank length, 1/2 bearing.
|
|
Rockler Crown Molding Bit
|
|
Cuts a simple, elegant edge for molding that will add character to any room. 1-1/4 diameter, 2-1/4 cutter length, 1/2 shank, 1-1/2 shank length.
|
|
Rockler Crown Molding Bit
|
|
Cuts a traditional crown molding profile for a stately accent in any room. 1-1/4 diameter, 2-1/4 cutter length, 1/2 shank, 1-1/2 shank length.
|
|
Rockler 25 Degree Straight Raised Panel Bit
|
|
Profiled to a simple, angular straight-line style for a classic fielding panel. 3-1/2 diameter, 3/4 cutter length, 1/2 shank, 2 shank length.
|
|
Rockler Classical Reversible Rail Stile Bit
|
|
Make perfect professional looking cabinet doors every time. Use this cutter to make square edge or arch pattern doors without a fence. One bit cuts both the rail and stile profiles; simply remove the heads and reverse the positions. Available in chamfer, traditional, or classical styles. 1-5/8 diameter, 15/16 cutter length, 1/2 shank, 1-1/2 shank length, 22mm bearing.
|
|
Rockler RoundEdge Matched Stile and Rail Bit Set
|
|
This matched stile and rail bit set is factory set to guarantee a perfect fitting joint every time. Features a center bearing design. Slot cutter can be easily removed. 1-5/8 diameter, 1 cutting length, 1/2 shank, 1-1/2 shank length. 22mm bearing.
|
|
Freud TwoPart Chair Rail Bits
|
|
Application: Creates standard # 300 decorative chair rail profile as well as beautiful panel moldings Chair Rail adds a beautiful horizontal detail to any room in the home or office. Choose your favorite wood, and perfectly match the popular chair rail # 300 design. Use with hardwood or softwood to mill stain grade molding. Bits can also be used by themselves for other profiles. Use with table mounted, CNC or automatic routers. Note: For best results make two or more passes.
|
|
Plunge Ball Marble Storage Router Bit
|
|
This bit made for us cuts a 5/8' diameter slot for storing marbles used in board games.
|
|
Freud Ogee Table Edge Handrail Bits
|
|
Application: Attractive edging of tables, plaques and handrails. Produces sturdy, attractive handrails for staircases. Combine with another rail profile to create a custom railing design. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Bead Table Edge Handrail Bits
|
|
Application: Attractive edging of tables, plaques and handrails. Produces sturdy, attractive handrails for staircases. Combine with another rail profile to create a custom railing design. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Handrail Bits
|
|
Application: Banisters and handrails Ideal for creating custom banisters and handrails. Use these bits for the lower profile on a handrail; select Freud bit 99-450 or 99-452 for 99-027 for the top profile. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Brick Molding Bit
|
|
Application: Creates industry standard Brick Molding profile #180 Mill straight or arched molding to fit windows, doors or arched openings. Features Freud's patented 2+2 technology for extra-clean cuts in crossgrain applications. Use with hardwood or softwood to mill stain grade molding. Use with table-mounted portable routers.Note: For best results make two or more passes
|
|
Freud Window Stool Bit
|
|
Application: For milling a graceful, traditional window sill profile. Perfect for renovators and remodelers who need to match an existing window stool, or to add a beautiful decorative touch to an unadorned window opening. Profile based on a traditional New Orleans design. Suitable for 11/16 or 3/4 thick material. Includes a ball bearing guide for use with patterns or to align the fence. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Casing Bits
|
|
Application: Creates industry standard casing profiles #356, #366,#376, and #445 Perfectly match four standard door casing designs with your choice of wood. Add elegant detail to doors, windows, built-ins and many other projects. Use with hardwood or softwood to mill stain grade molding. Use with table mounted, CNC or automatic routers.Click More Images for individual bit profiles. Note: For best results make two or more passes.
|
|
Freud Reversible Wainscoting Bit
|
|
Application: For milling matching joints in wainscoting. Works with stock from 1 to 5 thick, and mills matching frame joints with remarkable ease and precision. Bit height is set one time for male and female joints without requiring fence or height adjustments. Just rout stiles face down and rails face up for a perfect fit. Versatile designafter routing the matching profiles, rout a rabbet on the back to accept the tongue of a raised panel in 3 stock. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table-mounted portable routers.
|
|
Freud Beadboard Bit System
|
|
Application: Create beautiful wainscoting, paneling, back panels for bookcases, and much more. Mills traditional beadboard in a variety of thicknesses and widths. Includes two slot cutters to rout either 1/4 or 1/16 tongue groove joints. Use with any hardwood or softwood to match your project or dcor. Use only with a table mounted router and fence.
|
|
Router DesignInlay Kit
|
|
Brighten up your projects with classic inlays and charming geometric designs. This simple, carefully engineered system allows you to create hundreds of patterns with your plunge router, including lacework, cutouts, intricate floral designs and classic dovetail keys. Best of all, it’s simple to use. The rotating template discs are clearly labeled and the teeth lock precisely into position; just follow the design guide for foolproof results. If you want to create your own design, the pencil guide allows you to draw it out and refine it before “taking the plunge.” The system comes complete with baseplate, bushings and router bits, so it’s ready to use right out of the box.
|
|
Precision Brass Setup Bars
|
|
Machined solid brass setup bars allow you to accurately set depth of cut, fence to cutter distance, material thickness and more without using calipers or tape measure.Accurately machined to within .005'Set includes six 2-1/2 long bars measuring 1/8, 3/16, 1/4, 5/16', 3/8 and 1/2 square.Can be combined for additional heights.
|
|
Ogee Base Molding Bit
|
|
Unique new profile available only at Rockler! Designed especially for base molding, this carbide-tipped router bit is also ideal for edge-shaping tabletops, box and trunk tops, picture frames, and more.Manufactured from K20 tungsten carbide for clean cutting action.Final sharpening with 600 grit diamond wheel.3/4 cutter height.1/2 shank.
|
|
Tight And Wide Router Bases For Porter Cable 690s
|
|
This array of router bases allows minimum space between cutter and material which gives increased stability and control.
|
|
Freud Base Cap Bits
|
|
Application: Mill base cap or traditional boards in any width. Ideal for renovators who need to match old, extra-high base moldings. Bits can be used to rout base cap only, or to profile the edge of wide base molding. Choose your favorite wood to suit the room. Use with hardwood or softwood to mill stain grade molding. Use with table mounted, CNC or automatic routers. Note: For best results make two or more passes.
|
|
Mini 3Piece Frame Panel Router Bit Set
|
|
Create miniature frame and panel doors as small as 2-3/4 square! This stile and rail router bit set works with stock as thin as 7/16, and as thick as 11/16. Includes miniature bearing-guided rail-and-stile router bits and a panel-raising bit. Traditional profile.1/2 shanks reduce chatter.Carbide cutters offer long-lasting clean cuts.Comes in a sturdy wooden storage box.
|