| | | Description |
|
Incra Lead Screw Router Table Fence System
|
|
Upgrade your router table with this versatile and accurate router table fence from Incra. Features patented Lead Screw positioning technology - no measuring required!Basic cuts such as dadoes, grooves and box joints become a simple matter of slide, click and cut!Half-blind and through dovetails are easily accomplished on any router table.
|
|
Incra Miter Gauge 1000
|
|
Unbeatable accuracy at an affordable price! Includes solid steel laser-cut protractor head, 18 track fence and sliding stop positioner.Sliding scales fit perfectly in the top slot on the fence to make stop positioning easy, fast and accurate.
|
|
Kreg Bench Clamp Kit
|
|
Assemble pocket hole joints with ease and still enjoy a perfectly flat work surface.New, smaller plate design easily mounts into a workbench top or piece of plywood for multiple setups.Also ideal as a hold-down for drilling, routing and sanding!
|
|
Kreg Precision Band Saw Fence
|
|
Add a new level of accuracy to your band saw! Designed by band saw expert Mark Duginske, this fence provides an unprecedented level of rigidity, adjustability and precision.
|
|
Kreg8482 Precision Miter Gauge System
|
|
Positive stops at 0º, 10º, 22-1/2º, 30º and 45º — and micro-adjustability to 1/100º — give you speed, repeatability and the same accuracy that machine shops strive for!Add to that the perfect, repeatable dimensions you’ll get from the precision flip stop, and you can say “goodbye” to mitered joint gaps forever.
|
|
Freudreg HeavyDuty Variable Speed Jig Saw
|
|
Fully-loaded jig saw cuts through thick boards and light metals with ease, and handles continuous operation.Electronic cruise control maintains constant speed under variable load for a faster, finer cut.120 V, 6 amp motor with variable speed (500-3,000 spm) allows you to adjust the blade speed to the material being cut.Four-position orbital action lets you cut through stock faster.Base tilts for angled cuts up to +/- 45º.
|
|
Angle Fixreg Miter Guide
|
|
Now it’s easy to set the saw angle for perfect miters every time!Automatically halves the angle joint for external and internal angles.
|
|
Incrareg Miter Slider Bars
|
|
Eliminate difficult and time-consuming setup operations while maintaining accuracy and repeatability! Extruded aluminum miter bar has adjustable aluminum runner for perfect sliding action and can be locked in place for stationary table saw and router table jigs.Available in 24 and 18 lengths.Works with any standard 3/8 x 3/4 miter slot.
|
|
Scroll Saw Sanding File
|
|
Turn your scroll saw into a power sander. Silicon carbide abrasive is aggressive enough to cut as well as sand in most materials.
|
|
Kreg Jigreg K3 Master System
|
|
The Kreg K3 Master System includes everything you need to make perfect pocket holes. Just drill and drive. Finished with your frames? Move right on to drawer installation with the Kreg universal drawer slide mounting jig. This handy jig eliminates all the fuss of measuring and marking. Just push the jig against the cabinet face and drill away! Drawers slide smoothly every time.View the Kreg K3 Master System Interactive Demo (requires Flash).View this Vidjeo on the Kreg Pocket Hole System ---FREE Drawer Mount Jig (38444)with purchase of K3 Master System. $29.99 Value!Plus, get a $20 Mail-In Rebate from Kreg! Offer valid March 1st, 2008 - May 31, 2008. ---
|
|
Electronic Digital Readout for Portable Planers
|
|
Affordable attachment accurately displays the thickness of the board exiting the planer.Eliminates the need for tape measure or calipers.Measurements in inches or mm.
|
|
HeavyDuty Tenoning Jig
|
|
Straight, angled or mitered tenons - this jig cuts it!
|
|
Porter Cable Pin Nailer Kit
|
|
Quantities are limited! Offer valid while supplies last!Features include ability to automatically adjust for a variety of fastener lengths, bottom-load magazine that stores 170 pin nails, dual trigger feature, and more.
|
|
Table Saw Blade Holder
|
|
Store any 10 table saw blade on your shop wall.With convenient hanging hook.Includes shop knob and washer to securely fasten blade to holder.Plastic.
|
|
Olson PGT Scroll Saw Blades
|
|
Olson's Precision Ground Teeth (PGT) scroll saw blades are the finest on the market - they outperform and outlast all other blades!Assortment pack includes six each of #5, #7 and #9 blades.
|
|
Bosch 1590EVSK Jig Saw
|
|
Top-handle jig saw is loaded with great features to make it the most precise and powerful jig saw on the market!With 6.4 amp motor.
|
|
Bosch 1295DVSK 5 Random Orbit Palm Sander
|
|
Tackle almost any sanding job — from aggressive stock removal to swirl-free finishing!Multi-purpose sander duplicates natural hand sanding action with pad that both orbits and rotates.Powerful 2.2 amp motor (7,000-12,000 OPM) ensures fast, smooth results on all surfaces.
|
|
Forrest Chopmaster Saw Blades
|
|
Specially designed blades for chop saws, sliding compound miter saws, and radial arm saws.
|
|
Washer Head Face Frame Screws
|
|
Choose the right screws for the wood your using. These screws, with their square drive washer heads, ensures that the screw will seat in the bottom of the pocket hole every time.Sold in packs of 100 or new 1,000 packs.
|
|
Kreg Universal Bench Klamp
|
|
Universal hold-down clamp for the workbench lets you assemble pocket hole joints with ease and still enjoy a perfectly flat work surface! Pre-drilled for mounting to your workbench or piece of plywood for a 360º pivoting clamping station.
|
|
Freud SD608 8 DialAWidth Dado
|
|
Now you can have dial capability with no wobble! Stacked dado set features dial hub for shim-free adjustability and laser-cut blade plates for extreme accuracy.
|
|
Blade Stabilizers
|
|
Reduce rim vibration and noise while extending blade life! Use on 7 diameter and larger blades on stationary saws. With 5/8 arbor. (Set of 2).
|
|
Incra Miter Gauge V27
|
|
Compact size makes this the most affordable Incra miter gauge ever!Engineered to provide high performance for your table saw, band saw, router table, disk sander, belt sander or any other tool in need of a better miter gauge.
|
|
Pen Blank Drilling Jig
|
|
Drill perfect pen blanks without risking blowouts.For use with a Rockler drill press table.Comes with four T-bolts and four knobs.
|
|
Crown Molding Compound Miter Jig
|
|
Now it’s easy to create a distinct, stylish look with crown molding! Our innovative new compound miter jig makes it simple to cut difficult compound miters with a standard miter saw.
|
|
Delta Industrial Model SA350K Bench Oscillating Spindle Sander with a 14HP
|
|
In charge of all your sanding needs.Model SA350K Delta Industrial Model SA350K Bench Oscillating Spindle Sander with a 1/4HP, single phase motor, cast-iron table, table insert, 1/2 spindle, 3/4 sanding drum and 3/4 sleeve, dust bag, 3/16 allen wrench, 1/2 socket wrench and instruction manual.
|
|
Delta8482 6 Variable Speed Bench Jointer
|
|
Offers a wide range of speeds for fast, efficient jointing and surfacing of soft woods, hard woods and plastics.Delta ShopMaster Model JT160 6 Variable Speed Bench Jointer with a 10 amp., 120V motor; 2-knife cutterhead, cutterhead guard, push blocks, wrenches and instruction manual.
|
|
Porter Cable 18 Ga 2 Brad Nailer Kit Model BN200B
|
|
This Nail Gun includes a 1/4' male coupler with dust cover, safety glasses, traveling case with 5,000 brad storage capacity, 1,000 brads, oil and allen wrenches.
|
|
Porter Cable 16 Ga 212 Finish Nailer Kit Model FN250B
|
|
16 Gauge Finishing Nailer has the safety located behind driver
|
|
Gecko
|
|
For lifting and carrying loads up to 110 lbs.
|
|
Mitermate Saw Guide
|
|
Enjoy cutting corners! Get super accurate cuts of all types with a circular saw and Mitermate.
|
|
DELTA 36851 Production Stock Feeder
|
|
The DELTA 36-851 includes 1HP, 230V, 1 Phase, two-speed reversing motor, Power cord, 3 rubber feed rollers, vertical and horizontal support columns, universal joints and lubricating gunRugged, Efficient Drive System. continuous-duty motor powers the lubricated gear box, which transmits power to roller chains and sprockets that drive feed rollers. This superior system assures positive feeding of all types of materials.Fully-Adjustable Support columns. Feeders come equipped with sturdy vertical and horizontal support columns and universal joints that feature either T or L locking mechanisms for securing feeders into horizontal, vertical or angled-feeding positions. Large handwheels move feeders horizontally or vertically along columns. Four bolts hold vertical support column to table surface.
|
|
DELTA 15126 RAM TYPE RADIAL DRILL PRESS
|
|
The DELTA 15-126 includes 6 spindle travel, No. 2 MT spindle, 42 column, 65-863 floor stand, head, jackshaft assembly, ram, cradle, column, table, raising mechanism, belt guards, motor pulley, 49-287 V-belt, 49-105 V-belt, motor and controls, instruction manualMachine tool capacity and performance combined with power tool adaptability and versatility.Extra drilling capacity allows you to take the drill right to the work.Built in jackshaft assembly provides 16 different speeds from 175 RPM to 8200 RPM.Head tilts a full 45° right or left with easy-to-read head tilt angle scale that permits setting of head at exact angle.Big cast iron machined table has four T-Slots and oil trough tapped to accommodate 1/2 pipe. column for extra spindle nose to table capacity and a big 6 quill stroke with a ram travel of 17.Convenient controls for extra operating ease features a quill lock knob, two quill wear adjustment screws and an adjustable quill return sping.Please note: This item is manufactured at time of order and requires 3-4 months for delivery. Payment is required at time of order.
|
|
DELTA 50850A 15 HP Dust Collector with Canister 1200 CFM
|
|
The DELTA 50-850A includes blower, (1) 2 micron pleated filter, (2) plastic 6 mil chip bags, support drum, (2) 4 diameter dust intake ports, (1) 6 ft. hose, (1) intake port cap, base, (4) swivel caster assemblies, cord and plug, Model 50-750 2 micron canister filter with handle, instruction manual2-micro pleated filters.Handle for easy cleaning of inner filter.(2) 4 diameter dust intake ports.
|
|
Zero Clearance Inserts
|
|
Laminated 1/2' Phenolic Resin plates resist wear and offer frictionless sliding.Improved control minimizes tear out, reduces wood damage and increases safety.
|
|
CNC Shark Routing System
|
|
Bring the speed and precision of computer-controlled machinery to your shop with this top value CNC system! With a table measuring 15-3/4 x 31-1/2 it’s ideally suited for carvings and machining operations on a large variety of signs, doors and other small projects. It boasts impressive power, speed, accuracy, and ease of use. With its robust steel and high-density poly-ethylene construction, it can take accidental impacts that would normally damage or destroy an aluminum or MDF machine. Optional Clamping Table features two hold-down slots for securing work anywhere along the length of the table. Compatible with the Bosch Colt Palm Router. Includes VCarve Pro software interface — a $500 value. You supply a computer with USB port, a Bosch Colt router, and a table top (router and table top also available sold separately). You connect the USB cable to the controller box and the other end to your computer.Visit a store near you for a live Demo!
|
|
DELTA 33400 14 Radial Arm Saws
|
|
The DELTA 33-400 includes 3 HP, 230V, 60Hz. Single Phase TEFC motor with electro-mechanical blade brake, 14 blade guard with anti-kickback attachment, retractable leaf guard, cutterhead return attachment, 14 combination blade, cuttinghead clamp knob, adjustable crosscut stop, steel legs, instruction manualExclusive, Turret Arm construction permits the sawblade to rotate a full 360° above the work table. Gives full table capacity for cutting both right and left hand miters.Unique, Micro-Set miter stops assure perfect right & left miter cuts for the life of the saw.Lifetime, track rods feature glass-smooth hardened surfaces to minimize roller friction.Up-front operating controls are conveniently located for safe, easy operation.Six positive, convenient table leveling jacks help sustain saw table-to-track arm parallelism for excellent cutting accuracy.Table measures a full 44 X 36-1/2.Convenient fence lock knobs allows user to adjust and lock-in the desired fence position at front of the machine.Cutterhead return automatically pulls the cutterhead behind the fence so material can be quickly repositioned for the next cut.Extra-long turret arm provides maximum outboard rip and crosscut.
|
|
DELTA JT360 Deluxe 6 Jointer
|
|
The DELTA JT360 includes 3/4 HP, 120/240 Volts induction motor, stand, dust chute, center-mounted fence, three-knife cutterhead, cutterhead guard, push blocks, **Accessory switch P/N 438-01-017-0141 required for 240V operation**, instruction manualHeavy-gauge steel stand with wide footprint design for sturdy support. Features built-in dust chute to direct dust and chips away from operator.Center-mounted 4-7/8 x 35 fence for maximum work support. Fence tilts for beveling and chamfering operations. Functions as a rear cutterhead guard on narrow cuts.Easy-to-read depth-of-cut scale with automatic stop at 1/8 setting facilitates fast set-up for repetitive finish jointing.Infeed table features cast-iron support ledge for rabbeting operations.Safety cutterhead guard pivots out of the way of work during operation.
|
|
DELTA 17959L 17 Laser Drill Press
|
|
The DELTA 17-959L includes Drill press with 3/4 HP induction motor, 5/8 chuck, Laser pod, 12 mm allen wrench, 5 mm allen wrench, 4 mm allen wrench, 3 mm allen wrench, Drift key, Instruction manualFully adjustable laser pod projects a crosshair on the work piece to indicate the location of bit contactLarge, redesigned base helps promote greater tool stabilityWoodworker's table has a removable insert for through drilling with large bits and accomodates sanding drums as wellUnique table is designed to eliminate auxillary fixtures by tiliting left and right & forwardLarge quill stroke capacity allows users to drill a variety of demanding operationsHeavy-duty 3/4 HP motor provides ample power for demanding applicationsLargest in class cast iron head provides smooth drilling with minimal vibrationIntegrated task light provides improved visibility in the drilling area
|
|
DELTA 15233 15 Production Drill Presses
|
|
The DELTA 15-233 includes Production-table, Belt and pulley guard, Belt and motor pulley (supplied wit 5/8 bore unless 1/2 bore is specified), self-locking depth stop, depth gage, self-ejecting chuck key, motor and controlsExtra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings. Massive quill is a full 2 diameter. VS6 has the same excellent construction, PLUS an extra bearing below the spindle pulley. This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point.Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drillingjob on any material- 450 to 4700 rpm with a 1725 rpm motor and 300 to 3100 with an 1140 rpm motor.Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling... PLUS, the extra stroke required for clearing jigs and fixtures.Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio. You can choose an extra-slow speed for drilling very hard materials... an extra-fast speed for working soft materials... or an optimum speed for any size bit material.Efficient variable-speed drive lets you select any spindle speed instantly while machine is running. A self-locking cam, plus a snubber feature, hold speed settings constant under all load conditions. Proper belt tension is automatically maintained for full power transmission.
|
|
DELTA RS830 10 Professional Radial Arm Saw
|
|
The DELTA RS830 includes stand, 1-1/2 HP, 120/240 Volts motor, automatic blade brake, 10 saw blade, blade wrenches, instruction manualCast-iron track, column and column support for rigidity and continued accuracy.Depth-of-cut control handle and locking levers are positioned above the table for easy access.Steel stand for sturdy support.Extra-large table provides support for wide panels or large workpieces.Provides greater cutting capacity for cross-cutting nominal 2 thick stock up to 16 wide.Miter cutting capacities in nominal 2 thick stock are 10-1/2 at 45° left and 11 at 45° right.Dual-threaded shaft accepts a number of accessories to expand the use of saw.
|
|
EZ jointer Clamp Kit
|
|
Straighten any length of lumber using your table saw.
|
|
PorterCable Razor Carbide Saw Blades
|
|
Cutting just got easier! These innovative variable tooth carbide saw blades combine fast-cutting teeth with smooth-cutting teeth, resulting in faster cutting speed, cleaner cut edges, less cut noise and longer life!Choose from two blades: 10 50 tooth razor finisher and 7-1/4 20 tooth razor framer.
|
|
DELTA 50764 5 HP Dust Collector 4800 CFM
|
|
The DELTA 50-764 includes motor and blower, support frame, (2) 1 micron filtration bags, (4) 6 mil plastic chip collection bags, (2) snap in bag rings, (4) 5 intake ports, (4) swivel caster assemblies, instruction manualStandard 1 micron filtration bags keep your shop safer and cleaner.Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust. The dust ports and motor housing can be oriented facing up or down.Snap-in bag rings are faster, easier and eliminate need for cam-over-lock style clamps.6 mil plastic chip collection bags show you when the bags need emptying.Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way.** 460V operation requires replacement of the motor starter. This part is available from your industrial electrical supply dealer. **
|
|
DELTA 36R53L 10 Unisawreg 5HP 3 Phase Right Tilt
|
|
The DELTA 36-R53L includes 5 HP, 200-230/460 Volts, 60 hz, 3450 RPM, 3 Phase, with low-voltage control (LVC) push-button station, magnetic starter, TEFC motor, (2) 10 cast iron extension wings, equipment mounting hooks, see-through blade guard, 10 diameter carbide-tipped blade (5/8 bore), miter gauge, table insert, motor pulley, set of three matching V-belts, dust port for 4 dust colleciton, instruction maual, **3 Phase electricals will be supplied wired for 230 Volts unless 460 Volts is specified.**Widely-spaced, massive cast-iron trunnions support the husky saw carriage and are completely adjustable to ensure perfect alignment.Precision-ground, stress-proof arbor is flanged-faced after assembly for accuracy.Positive traction, V-belt drive operates between two lifetime ball bearings to eliminate vibration and assure smooth operation.Cast-iron table is T-Slotted on both sides of blade to hold AUTO-SET® Miter gauge securely.Includes built-in adjustable 90° and 45° stops, large conveniently placed control and equipment mounting hooks.
|
|
DELTA 22470 24 Planer 22470
|
|
The DELTA 22-470 includes 7-1/2 HP, Three Phase motor with magnetic motor starter and automatic reset overload protection, three-knife cutterhead, sectional serrated infeed roll, double bed rolls, polyurethane outfeed rolls, sectional chipbreakers, dust chute, knife-setting gage, wrenchStandard-equipment knife-setting gauge is included for accurately setting the three-knife cutterhead.Hinged side panel access doors make it easy to change feed rate speed from 20 to 30 feet per minute.Sectional serrated steel infeed roller with sectional chip breakers for planing uneven stock.Up-front controls include a handy lever for instantly engaging and disengaging feed rolls and push-button on/off switch.Micro-adjustable bed rollers lever quickly raises and lowers bed rolls.
|
|
DELTA 33411 16 Radial Arm Saws
|
|
The DELTA 33-411 includes 5 HP, 230 Volts, 1 Phase, TEFC motor with electro-mechanical blade brake, 16 blade guard with anti-kickback attachment, retractable leaf guard, cutterhead return attachment, 16 combination blade, cuttinghead clamp knob, adjustable crosscut stop, steel legs, instruction manualExclusive, Turret Arm construction permits the sawblade to rotate a full 360° above the work table. Gives full table capacity for cutting both right and left hand miters.Unique, Micro-Set miter stops assures perfect right & left miter cuts for the life of the saw.Lifetime, track rods feature glass-smooth hardened surfaces to minimize roller friction.Up-front operating controls are conveniently located for safe, easy operation.Six positive, convenient table leveling jacks help sustain saw table-to-track arm parallelism for excellent cutting accuracy.Table measures a full 44 X 36-1/2.Convenient fence lock knobs allows user to adjust and lock-in the desired fence position at the front of the machine.Cutterhead return automatically pulls the cutterhead behind the fence so material can be quickly repositioned for the next cut.Extra-long turret arm provides maximum outboard rip and crosscut.
|
|
DELTA 43791 5Speed Wood Shaper
|
|
The DELTA 43-791 includes 7-1/2HP, 3450 RPM 3 Phase motor with automatic brake, 5-speed belt and pulley system, Cast-iron table, 3/4 and 1 1/4 spindles, Three steel insert rings, Work hold-down and cutterhead guard assembly, Fence assembly, Tools and instruction manualDependable 7 1/2HP, 3450 rpm three phase motor has an automatic brake that stops cutter in seconds. Belt tension lever lets operator change spindle quickly and easilyWork hold-downs help secure workpiece to table and fence to protect operator from chips and debris.Drop-in spindles (3/4 or 1 1/4 diameter) are easily mounted or removed, using a locking nut and special wrench supplied with the machine. Three removable steel table insert rings are supplied to accommodate various cutter diameters.Up-front controls include a large emergency stop button, forward/reverse switch for changing spindle rotation, start/stop switch and spindle lock for removing or replacing cutterHeavy cast-iron table measuring 31 3/4 X 39 5/8 for supporting large workpieces.Extruded aluminum fence mounted on heavy cast iron assembly is fully adjustable. Two ports, measuring 4 diameter, accept an accessory dust collector connector for a cleaner work environment.Miter gage with work clamp provides extra holddown support for large shaping projects.
|
|
DELTA 36L53L 10 Unisawreg 5HP 3 Phase Left Tilt
|
|
The DELTA 36-L53L includes 5 HP, 200-230/460 Volts, 60 hz, 3450 RPM, Three Phase motor with low-voltage control (LVC) push-button station, magnetic starter, TEFC motor, (2) 10 cast iron extension wings, equipment mounting hooks, see-through blade guard, 10 diameter carbide tipped blade (5/8 bore), motor pulley, miter guage, table insert, set of three matching V-belts, dust port for 4 dust colleciton hose, instruction manual, **3 Phase electricals will be supplied wired for 230 Volts unless 460 Volts is specified.**Widely-spaced, massive cast-iron trunnions support the husky saw carriage and are completely adjustable to ensure perfect alignment.Precision-ground, stress-proof arbor is flanged-faced after assembly for accuracy.Positive traction, V-belt drive operates between two lifetime ball bearings to eliminate vibration and assures smooth operation.Cast-iron table is T-Slotted on both sides of blade to hold AUTO-SET® Miter gauge securely.Includes built-in adjustable 90° and 45° stops, large conveniently placed control and equipment mounting hooks.
|
|
DELTA 15234 15 Production Drill Presses
|
|
The DELTA 15-234 includes motor and controls, belt and pulley guard, belt and motor pulley (supplied with 5/8 bore unless 1/2 bore is specified), self-locking depth stop, depth gage, self-ejecting chuck keyExtra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings. Massive quill is a full 2 diameter. VS6 has the same excellent construction, PLUS an extra bearing below the spindle pulley. This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point.Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drillingjob on any material- 450 to 4700 rpm with a 1725 rpm motor and 300 to 3100 with an 1140 rpm motor.Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling... PLUS, the extra stroke required for clearing jigs and fixtures.Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio. You can choose an extra-slow speed for drilling very hard materials... an extra-fast speed for working soft materials... or an optimum speed for any size bit material.Efficient variable-speed drive lets you select any spindle speed instantly while machine is running. A self-locking cam, plus a snubber feature, hold speed settings constant under all load conditions. Proper belt tension is automatically maintained for full power transmission.
|
|
Incrareg HingeCrafter
|
|
Shape and cut wooden hinges that look just like the metal version — ideal for everything from jewelry boxes to cabinets.Just combine your #29571 Incra Jig positioner or #24981 Incra Lead Screw 17' Fence System with the HingeCrafter drill guide and the results will be beautiful wood hinges ready to glue right into your project.
|
|
Incrareg Master Reference Guide Template Library
|
|
The complete guide to creating master joinery using any Incra positioner!Includes step-by-step instructions, detailed illustrations, and 51 multi-colored joint-making templates.
|
|
Laminate Cutting Guide
|
|
Now you can cut any thin plastic laminate with positive control faster, smoother and truer.
|
|
DELTA 32350 Horizontal Boring Machine
|
|
The DELTA 32-350 includes 1 HP, 3450 RPM, 115/230 Volts, Single Phase motor, Adjustable hold-down clamp, See-thru guard, Cast-iron table, Dovetailed miter gauge, Miter guage, Adjustable stock stop, Adjustable boring head, Drill bit adapter, Steel cabinet, Foot pedal, Dust chute, Wrenches, Instruction manualAdjustable hold-down clampand boring head are pneumatically controlled by a foot pedal to keep operator's hands free.See-thru guard protects from flying woodchips.Heavy cast-iron table features dovetailed miter gage slots for keeping miter gage secured when locked in place. Also with standard-equipped stock stop for operations that require repetitive drilling.Loosening the nut just below the boring head allows the operator to quickly adjust the depth stop for final drilling depth.Guide rails are concealed inside flexible rubber tubing for protection against dust and chips.Tough cast-iron table is mounted on dovetail ways with an adjustable gib. The four bolts located on the right-hand side may be adjusted to compensate for wear.Aluminum Boring Head contains two adjustable spindles.Easy-to-read scales and reference lines for accurate setting.Convenient grease fitting accepts standard grease gun for lubricating boring head.Adjustable feed rate knob controls boring speed at which the drill bits enter the workpiece.Fabricated steel cabinet has bolt-down feet for operating sability.
|
|
DELTA 33410 16 Radial Arm Saw
|
|
The DELTA 33-410 includes 3 HP, 230 Volts, Single Phase, TEFC motor with electro-mechanical blade brake, 16 blade guard with anti-kickback attachment, retractable leaf guard, cutterhead return attachment, 16 combination blade, cuttinghead clamp knob, adjustable crosscut stop, steel legs, instruction manualExclusive, Turret Arm construction permits the sawblade to rotate a full 360° above the work table. Gives full table capacity for cutting both right and left hand miters.Unique, Micro-Set miter stops assures perfect right & left miter cuts for the life of the saw.Lifetime, track rods feature glass-smooth hardened surfaces to minimize roller friction.Up-front operating controls are conveniently located for safe, easy operation.Six positive, convenient table leveling jacks help sustain saw table-to-track arm parallelism for excellent cutting accuracy.Table measures a full 44 X 36-1/2.Convenient fence lock knobs allows user to adjust and lock-in the desired fence position at the front of the machine.Cutterhead return automatically pulls the cutterhead behind the fence so material can be quickly repositioned for the next cut.Extra-long turret arm provides maximum outboard rip and crosscut.
|
|
Kreg Stainless Steel Pan Head Screws
|
|
100% stainless steel makes these the ultimate exterior pocket hole screws. With no rust or corrosion, they’ll hold your garden and patio furniture together indefinitely and look good doing it. They boast all the features of Kreg’s pocket hole screws. Self-tapping screw tips make for easy driving. Wide heads boast incredible holding power. Deep-seated #2 square drive heads eliminate “cam out,” ensuring a tight, solid joint. Use fine thread for hardwoods; coarse thread for soft woods and plywood.
|
|
DELTA 36790 1416 Tilting Arbor Saw
|
|
The DELTA 36-790 includes 7-1/2 HP, 200-220/440 Volts (wired for 220 Volts), 60 hz, Three Phase motor with low-voltage (LVC) push-button station, magnetic starter and automatic reset overload, blade guard, BIESEMEYER® Commercial Fence System, guide bar, miter gauge, 43 x 59 table with two extension wings and fence support extension, instruction manual, **Table has removable table insert with buit-in leveling screws**, **Note: blade will not go completely below table unless youuse a 12 or smaller block--16 blade lowest position is 1.4 above table surface; 14 blade lowest position is 0.4 above table surface**Powerful motor handles the hardest woods.Double V-belt drive has 2 speeds for best cutting performance. Motor plate, trunnions and arbor support bracket are constructed of cast-iron for solid support and vibration-free operation.Arbor runs on pre-lubricated, sealed ball bearings and raises to the correct height and angle by a rack and wormscrew operating mechanism.T-slots on either side of saw blade hold miter gauge securely.Trunnion stops, adjustable from the top of the table, assure perfect 90° and 45° settings.Massive table provides extra support for handling large stock. Table is heavily-ribbed to prevent warping and distortion.The three-point locking Fence System ensures the fence will be precisely parallel to the blade and will provide a smooth clean cut accurate to within 1/64th of an inch.
|
|
DELTA 23725 SlowSpeed Bench Grinder
|
|
The DELTA 23-725 includes 3/4 HP, 8 amp, 120 Volts motor, flexible lamp, spark guards, eyeshields, tool rests, wheel dresser, assembly wrench, 8' cord, 2 wheels, water tray, instruction manualFriable, aluminum oxide wheel for for high-speed steel tools.Slow, 1725 RPM speed reduces heat while grinding.Shatterproof eyeshields, safeguard operator's eyes.Conveniently placed water tray is always there when you need it for cooling the workpiece.Adjustable spark deflectors, sturdy wheel guards and removable side plates provide increased operator safety.Sturdily constructed tool rests adjusts horizontally and vertically, and tilt for exact grinding angle desired.
|
|
DELTA 28206 14 Band Saw with 1HP Motor Enclosed Stand
|
|
The DELTA 28-206 includes 1 HP, 120/240 Volts motor and switch, enclosed stand, quick release tension lever, 2-speed pulley position, 4 dust collection port, 9-spoke wheel, blade and belt guards, arbor, motor pulleys and V-belt, blade guides, wood-cutting blade, instruction manual, **Blade length with 28-984 accy. height attachment: Max. 106 (2692 mm); Min 103-1/2 (2629 mm); Standard 105 (2667 mm)Nine-spoke precision-balanced wheels.Full 16 x 16 cast-iron table tilts 45 degrees right and 3 degrees left for beveling operations.Quick release tension lever.4 integral dust port.Cast-iron trunnions table support.Capacity to cut stock up to 6-1/4 thick (12-1/4 with height attachment).Lower blade guides have safe, accurate, micrometer adjustment.Lower guides angled to support blade to within 3/4 of table work surface ensures accurate cutting.Two-speed pulley position.Fully-adjustable upper and lower blade guides and blade support. Bearings maintain proper blade alignment.
|
|
Rockler Pitch Resin Remover
|
|
Ready-to-use solution quickly and easily cleans away the residue buildup that develops on blades and bits.Cleaner cutting edges will give you superior machining results and extend the life of your tools.16 fluid ounces.
|
|
Grex P635 23 Gauge Headless Pin Nailer
|
|
Voted Best New Tool in Popular Woodworking and Best Bet in Woodworker's Journal, this innovative pin nailer makes the perfect helpmate for finish and trim work. The patented magazine eliminates the need to adjust for different fastener lengths — just drop in your pins and you're ready to nail. Shoots headless pins for the smallest possible entry hole. Accepts fasteners up to 1-3/8 long.
|
|
DELTA 14651 Deluxe Mortiser
|
|
The DELTA 14-651 includes 1/2HP, 120VAC 60 Hz, Single phase induction motor, 3/8 Capacity chuck and key, Four mortising chisels and bits, Tool and chisel holder, Riser block, Instruction manualEasy and open access to drill chuck for bit changing.Large cast-iron base with center through hole.Adjustable rack and pinion fence and rack and pinion head raising and lowering.Mortising head column can be turned 180° and remounted for off-table mortising.Adjustable fence and hold down.Adjustable dovetail way on mortising headHeight attachment adds 1 3/4 of capacity under headMulti-position feed lever.Adjustable depth stop.Chuck key/hex wrench for bit and chisel changing.
|
|
DELTA AP200 18 HP Portable Air Cleaner 850CFM
|
|
The DELTA AP200 includes 1/8 HP motor, (4) eye bolts and flange nuts, (4) rubber feet, 6-foot plug with on/off switch, instruction manualDurable, powder-coated, all-steel construction.Easy-grip handles for carrying unit from one room to another.Extra-long, 6-ft. cord features a convenient, in-line, on/off rocker switch.Filter system includes a disposable, pleated outer filter and 3-pocket inner filter for superior air filtration. No tools required for filter replacement.Non-marring rubber feet protect floor and bench top surfaces and minimize operating vibration.Unit comes complete with eye bolts for suspending from ceiling. Simply supply your own chains.
|
|
DELTA 22610 RC63D 24 34 X 9 38 Planer
|
|
The DELTA 22-610 includes 10 HP, 200-220/440 Volts (wired 220 Volts), 60 hz, Three Phase motor with 24 Volts LVC magnetic starter and automatic reset overload, standard 4-knife cutterhead, set of four case hardened, high-speed steel knives, knife setting guageLumber gauge enables operator to measure stock thickness quickly.Rear pressure bar maintains even force on planed stock; outfeed roll helps maintain positive feeding under all conditions.Complete cutterhead and feed group are modulary mounted to the machine frame, including seperate bearing blocks for cutterhead. This allows the entire cutterhead to be removed without disturbing feed system settings.Spacious table raises and lowers on four precision, self-locking screws. Solid steel gibs keep table in perfect alignment regardless of thickness of cut. Dust-proof rubber boots protect screws from abrasive dust and moisture.
|
|
GaugeIt Table Saw SetUp Gauge
|
|
One of the most versatile table saw setup tools!Patented gauge can easily help you perform the three main table saw adjustments: blade angle, blade height and blade-to-fence distance.
|
|
MFT Connector
|
|
For connecting 2 MFT tables, requires 2 packs.
|
|
Standard Planer Head for HL 850 E
|
|
With solid carbide spiral blade.
|
|
Rustic Fine Planer Head for HL 850 E
|
|
With HSS spiral blade.
|
|
Rustic Coarse Planer Head for HL 850 E
|
|
With HSS spiral blade.
|
|
Solid Carbide Standard Replacement Blade for HL 850 E
|
|
For planer head HK 82 SD.
|
|
Freudreg LM74R Glue Line Rip Blade
|
|
Specially designed triple chip tooth produces extremely smooth glue line rips in hard and soft woods from 1/8 to 1 thick.
|
|
Freud LU82M Crosscut Rip Blade
|
|
This general purpose blade will provide great results crosscutting and ripping hard and soft woods.Triple chip grind teeth are suitable for cutting man-made wood products such as chipboard and MDF.
|
|
Gecko Set
|
|
With guide rail adaptor for rail securing onto non-porous flat surface.
|
|
Gecko Pad
|
|
Gecko pad replacement
|
|
Rockler Drill Press Table and Fence
|
|
Get an additional four square feet of versatility and precision with our exclusive Drill Press Table and Fence system! We designed it to our exacting standards to be the best of its kind available at a great price, too! There's virtually no drill press operation you can't perform better and faster with our exclusive drill press table and fence. Patented.
|
|
Rockler Band Saw Table and Fence
|
|
We've partnered with Bandsaw expert and author ' Mark Duginske' on our newest, exclusive Bandsaw Accessory Table.
|
|
Rockler Downdraft Table Hardware Kit And Plan
|
|
Everything you need to create your own downdraft table just add your own wood and filters!
|
|
Mortise Machine Table And Fence
|
|
The Mortise Machine Table and Fence mounts quickly and easily to most benchtop mortising machines - Rockler Rotary Guides secure your work against the fence, but allow movements to the right or left.
|
|
The Complete Tool Saver System
|
|
Tool maintenance kit includes five products that provide the craftsman, professional or hobbyist with everything needed to perform proper tool maintenance on small hand tools and large stationary equipment.Includes 1.5 oz. TopSaver, 2 oz. BladeSaver, 2 oz. Router Bit Lubricant, 2 oz. Dri-Tool Lubricant and 2 oz. OptiCut-XL.
|
|
DELTA 36831LA 10 Unisawreg 3HP Single Phase Left Tilt
|
|
The DELTA 36-831LA includes 3 HP, 230 Volts, 60 hz, 3450 RPM, Single Phase, TEFC motor with full voltage magnetic starter, equipment mounting hooks, see-through blade guard, 10 diameter blade, miter gauge, table insert, set of three matching V-belts, dust port for 4 collection hose, BIESEMEYER® 30 Commercial Fence with extra set of extension legs, cast-iron wing, laminated extension table, instruction manual, **Right Tilt also available; order 36-831A.**Widely-spaced, massive cast-iron trunnions support the husky saw carriage and are adjustable for superior accuracy.Precision-ground, stress-proof arbor is flanged-faced after assembly for accuracy.Cast-iron table is T-Slotted on both sides of blade to hold AUTO-SET® miter gauge securely.Positive traction, V-belt drive operates between two lifetime ball bearings to eliminate vibration and assures smooth operation.4 dust port for optimal dust management.Fence, miter gauge and wrench storage.Includes high pressure laminated extension table board.
|
|
DELTA 31396 Oscillating Edge Sander with Spindle Sanding Attachment
|
|
The DELTA 31-396 includes 3 HP, 220 Volts motor, spindle sanding attachments include: 1-1/2 x 2, 3 diameter, drums with collar inserts, heavy gauge steel fence, miter gauge, allen wrench, hardware, instruction manualPowered by a 3 HP, 220 Volts Single Phase motor.Idler roller can be used for edge sanding of irregular shapes.Quick-release belt tensioning for easier belt changing.Front cast-iron sanding table can be moved up and down, forward and backward.Adjustable head from 0° - 90° with detent stops at 0°, 45°, 90°.Spindle sanding kit with 3 sizes of drums and collars for contour sanding.Graphite sanding platen can tilt from 0° to 90° or any angle in between.
|
|
DELTA 36855 Production Stock Feeder
|
|
The DELTA 36-855 includes 1HP 230V 1 Phase two-speed reversing motor, Power cord, Two speed gear lever, Four rubber feed rollers, Vertical and horizontal support columns, Universal joints and lubricating gun.Rugged, Efficient Drive System. continuous-duty motor powers the lubricated gear box, which transmits power to roller chains and sprockets that drive feed rollers. This superior system assures positive feeding of all types of materials.Fully-Adjustable Support columns. Feeders come equipped with sturdy vertical and horizontal support columns and universal joints that feature either T or L locking mechanisms for securing feeders into horizontal, vertical or angled-feeding positions. Large handwheels move feeders horizontally or vertically along columns. Four bolts hold vertical support column to table surface
|
|
Jessem MiteRExcel Miter Gauge
|
|
Heavy-duty design provides exceptional rigidity and accuracy through the cut.Quick and easy fence adjustability with solid brass lock knobs.
|
|
JigCircular Saw Guide
|
|
Edge guide works with most popular circular and jig saws. Simply choose the bar that best fits your saw guide slot.
|
|
Fein Multimaster FMM 250Q Select Kit
|
|
Includes the new Multimaster FMM 250 Q, boasting 40% more power, better ergonomics and the ability to change accessories with just the flip of a lever. Go from saw to sander to scraper in just seconds. Unique oscillating action makes quick work out of tough, picky jobs like removing grout and scraping paint, and it’s the perfect sander for tight spots that you’d otherwise have to hand-sand. Variable speed lets you slow it down for delicate parts and crank it up for quick removal. Kit includes FMM 250 Q, sanding pad, universal E-CUT saw blade (29mm), carbide-tipped segment saw blade, HSS saw blade and rigid stopping knife.
|
|
DELTA 50875 3Speed Ambient Air Cleaner
|
|
The DELTA 50-875 includes 1/5 HP, 60 hz, 1025 RPM, 120V, single phase motor, (4) eye bolts and flange nuts, rubber feet, 6 ft cord, remote control, instruction manualHighest air flow 3-speed air cleaner in its class.Filters shop air faster than compeition.Remote control allows you to select from 3 speeds and set your time delay shut-off up to 4 hours.Patent pending dirty filter indicator determines the efficienty of your filter. When the needle points to the red it is time to clean your filter.Filters trap particles larger than 1 micron.Electrostatic filter is standard.
|
|
Supermax Dual Drum Sander 50x2
|
|
Dual Drum Sander 50x2Proscale Displays how much material is being removed per pass Displays zero when the desired thickness is reached Displays the actual thickness of the stock as it exits the sander Standard on 220 Volt Series 50x2 drum sanders (Optional on all other models) 50 x 2 Drum Sander Continuous-duty 7-1/2HP motor, 208 - 230 Volt power, single or 3 phase SandSmart automatic control of the infinite-variable feed rate of the conveyor (0-15 ft./min.) Multiple grit sanding in single pass with double drum models Precisely dimension stock within .010 across width of sander Magnetic starter Multiple grit sanding in a single pass 50 wide, dual (x 2) drum sanding capacity Casters included, (wheel and swivel lock) Electric height adjustment, high speed and adjustable speed ProScale depth gauge (DRO) in sures proper dimensioning Precision-flattened steel conveyor bed reinforced with four steel cross sections for no Self-cooling drum with abrasive Take-up Fasteners, make changing abrasives quick and easy and keeps abrasives tight Sand stock as short as 3-1/2 as thin as 1/32 and as thick as 12 Cast stand zinc-plated steel bed, center less ground column tubes Minimum of 1800 CFM dust collection recommended Shipped assembled, some minimal assem- bly required Drum ball bearings are sealed and per - manently lubricated 220 Volt Models 750102 SuperMax 50x2 dual drum, 1Ph 750302 SuperMax 50x2 dual drum, 3Ph Optional Accessories 59120 Abrasive Cleaning Stick 61-1010 50 Poly Conveyor Belt 98-0070 Rack-N-Roll (Abrasive Storage Shelf) Abrasives 24-200 Grit
|
|
Kreg 48 Top Trak Fence Flip Stop
|
|
Versatile and rugged anodized aluminum extrusion works well with various woodworking machines to ensure accuracy.Allows you to cut materials with more speed and repeatable precision than ever before.
|
|
EasyCoper for Crown Molding
|
|
Take the guesswork out of coping crown molding to create perfect inside corners!Allows you to quickly and easily cope crown molding with a power jig saw instead of a coping saw, reducing wrist, hand and arm stress.
|
|
DELTA 36R31XBC50 3 HP Right Tilt Unisaw wBiesemeyer Fence
|
|
The DELTA 36-R31X-BC50 includes 3 HP, single phase 230 Volts, TEFC motor with full voltage motor starter, 50 BIESEMEYER commercial fence system, carbide-tipped 50 tooth ATB&R saw blade, right extension table, adjustable steel support legs, two 10 cast-iron extension wings, standard insert, miter gage, motor cover, 4 dust connector, blade guard5 YEAR WARRANTY. All X5 series tools are backed by a best in class 5 year warranty. That is 3-4 years longer than other brands.3 HP, single phase 230V, TEFC motor with full voltage motor starter (GPE).50 Beisemeyer Commercial Fence System.Two 10 cast-iron extension wings.
|
|
DELTA 43792 5Speed Wood Shaper
|
|
The DELTA 43-792 includes 7 1/2HP, 3450 RPM three-phase motor with automatic brake, 5-speed belt and pulley system, Cast-iron sliding table, 3/4 and 1 1/4 Spindles, Three steel insert rings, Work hold-down and cutterhead guard assembly, Fence assembly, Tools and instruction manualDependable three phase motor has an automatic brake that stops cutter in seconds. Belt tension lever lets operator change spindle quickly and easily.Work hold-downs help secure workpiece to table and fence.Drop-in spindles (3/4 or 1 1/4 diameter) are easily mounted or removed, using a locking nut and special wrench supplied with the machine. Three removable steel table insert rings are supplied to accommodate various cutter diameters.Up-front controls include a large emergency stop button, forward/reverse switch for changing spindle rotation, start/stop switch and spindle lock for removing or replacing cutter.Heavy cast-iron table measuring 31 3/4 X 39 5/8 for supporting large workpieces.Extruded aluminum fence mounted on heavy cast iron assembly is fully sdjustable. Two ports, measuring 4 diameter, accept an accessory dust collector connector for a cleaner work environment.Sliding table glides on six adjustable ball bearings for smooth table travel.Table Lock halts sliding action for conventional shaping operation.Miter gauge with work clamp provides extra hold-down support for large shaping projects.
|
|
Chip Guard
|
|
Replacement chip guard for a clear view of the work piece, protects against flying chips.
|
|
Kreg8482 Precision Measuring Systems Kit
|
|
Complete measuring system for your miter saw, radial arm saw or drill press is faster and more accurate than putting a pencil mark on every board!Just set precision lens cursor to desired length and place board against stop — you’re ready to cut to length.
|
|
TableTop Lubricant
|
|
Tabletop surface lubricant dries to a hard slippery coating that reduces sliding friction between wood and metal surfaces, allowing you to perform your work at optimum capability.
|
|
DELTA 36717 10 Hybrid Saw w30 BIESEMEYERreg Commercial Fence System Rail and Table Board
|
|
Get a FREE TENONING JIG (Model 34-184) by mail! Offer valid 9/1/07 to 12/31/07. See rebate form for more details.The DELTA 36-717 includes 1-3/4 HP, 120 Volts (240V capable) motor, deluxe see-thru blade guard with splitter and anti-kickback fingers, heavy-duty rip fence, miter gauge, 10 saw blade, table insert, arbor pulley, poly v-belt, cabinet, rail, 30 BIESEMEYER® Commercial Fence System, laminated table board, instruction manualLeft tilting blade tilts away from fence.Side table board included.45° and 90° bevel stops adjustable from the table top; deluxe miter gauge.Oversized on/off switch with full overload protection.
|
|
DELTA GR450 8 VS Grinder with Toolless Quick Change
|
|
The DELTA GR450 includes 5 amp, 60 hz, 1725-3450 RPM, Single Phase motor, patent pending quick change/tool-less wheel changing system, flexible lamp, cast iron tool rest, eye shields, spark deflectors, coarse, friable, buffing wheels, adjustment wrench, diamond wheel dresser, instruction manualVariable-speeds (1725-3450 RPM) for grinding, sharpening, or buffing.Quick change variable-speed system on front.Sharpening wheel allows you to sharpen a variety of materials.Cast-iron base minimizes operating vibration.Also includes adjustment wrench and diamond wheel dresser.Flexible gooseneck lamp for clear view of grinding wheels and workpiece.
|
|
DELTA 36977 10 Left Tilt CONTRACTORS SAWreg with DELTAreg T2 30 Fence Rail and Two Stamped Steel Ta
|
|
The DELTA 36-977 includes 1-1/2 HP, 115 Volts/230 Volts motor (wired 115 Volts), (2) cast-iron extension wings, see-thru blade guard with splitter, miter gauge, 10 saw blade, V-belt arbor pulley, heavy-duty steel stand, mobility kit, dust collection insert, **model without fence, instruction manualBlade tilts away from the fence (left tilt) in ripping applications to prevent tearout on the outside corner of a mitered joint.Large cast-iron table with stamped metal extension wings measures a full 40-1/2 x 27 for maximum material support.Mobile base attaches directly to wide-stance base for maximum saw support and mobility.Deluxe T-Slot miter gauge with adjustable stops at 45° and 90°.Powerful 1-1/2 HP induction motor handles tough cutting operations.
|
|
DELTA 36L31XU50 3 HP Left Tilt UNISAWreg with UNIFENCEreg
|
|
The DELTA 36-L31X-U50 includes left tilt, 3 HP, single phase 230 Volts, TEFC motor with full voltage motor starter, 50 UNIFENCE® saw guide with adjustable flip stop, carbide-tipped 50 tooth ATB&R saw blade, laminated table board, adjustable steel support legs, two 10 cast-iron extension wings, standard insert, miter gage, motor cover, 4 dust connector, blade guard, instruction manual5 YEAR WARRANTY. All X5 series tools are backed by a best in class 5 year warranty. That is 3-4 years longer than other brands.3 HP, single phase 230V, TEFC motor with full voltage motor starter (GPE).50 Unifence saw guide with adjustable flip stopTwo 10 cast-iron extension wings.
|
|
Incra Miter Express Miter Sled
|
|
Upgrade any miter gauge to a miter sled in seconds!Makes cutting multiple pieces with precision a snap.Safely doubles any miter gauge’s crosscut range up to 24 and eliminates all side play to improve your miter gauge’s performance.True zero-clearance tearout control on both sides of the table.Works with any brand of miter gauge. Miter gauge not included.Miter Express Video Demo ---
|
|
DELTA 43495X 3 HP HeavyDuty Shaper
|
|
The DELTA 43-495X includes Machine with 3 HP, Single phase 230V, TEFC motor, full voltage magnetic starter and controls, Motor pulley, Poly V-Belt drive, Two 10 cast-iron extension wings, Micro-adjustable fence and guard assembly, 3/4 Spindle, Table inserts, Starting pin, 2-speed spindle pulley, Wrenches and instruction manual5 YEAR WARRANTY. All X5 series tools are backed by a best in class 5 year warranty. That is 3-4 years longer than other brands3 HP, single phase 230V, TEFC motor.Two 10 cast-iron extension wings.Micro-adjustable fence and guard assembly
|
|
DELTA 36715 10 Hybrid Saw with T2 30 Fence and Rail
|
|
Get a FREE TENONING JIG (Model 34-184) by mail! Offer valid 9/1/07 to 12/31/07. See rebate form for more details.The DELTA 36-715 includes 1-3/4 HP, 120 Volts (240V capable) motor, deluxe see-thru blade guard with splitter and anti-kickback fingers, heavy-duty rip fence, miter gauge, 10 saw blade, table insert, arbor pulley, poly v-belt, cabinet, rail, T2 30 fence, instruction manualLeft tilting blade tilts away from fence.45° and 90° bevel stops adjustable from the table top; deluxe miter gauge.Oversized on/off switch with full overload protection.
|
|
DELTA 28640 20 WoodCutting Band Saw
|
|
The DELTA 28-640 includes 2 HP, 230 Volts, 60 hz, 1 phase motor with push-button station, magnetic starter, transformer and overload protection, blade brake, 3 OD dust chute, wheel brush, tilting table, rip fence with guide bar, adjustable blade guides and 1/2 blade, instruction manualUpper and lower wheel covers are hinged for fast blade changes. Cast-iron wheels are precision balanced and feature replaceable urethane tires for better tracking.Built-in dust chute directs sawdust down away from lower wheel. Heavy-gauge steel cabinet for support and accuracy: can be secured to floor for added stability.Extra-large, cast-iron table with T-Slot provides ample support for large work.Sturdy cast-iron rip fence with solid steel guide rail .Handy blade tensioning control facilitates accurate tension adjustment. Direct-reading scale enables operator to select the exact tension for various blade widths.Fully-adjustable, upper and lower blade guides and blade support bearings maintain proper blade alignment. Integral oil detents facilitate periodic lubrication to insure trouble-free performance.
|
|
Porter Cable 3812S Portable Table Saw with FREE 100 Gift Card and FREE Outfeed Support
|
|
Order today and get a FREE $100 Rockler Gift Card and a FREE Outfeed Support! ($41.99 Value) Hurry! Offer valid while supplies last!This 15 amp, 10' Portable Table Saw works where you do; with a base designed for bench, stand, or job site 2 x 4 sawhorse mounting.
|
|
JessEm MastRSlide CrossCut Table
|
|
The ultimate cross-cutting solution for your table saw!Sliding cross-cut table delivers precision and performance every time.
|
|
Bench Dog ProCut8482 Portable Saw Guide
|
|
Get perfect 90º crosscuts with your circular saw every time!Built-in guides square Pro-Cut to the workpiece.Two rubber strips prevent side-to-side movement.
|
|
DELTA 31735B 6 Belt12 Disc Finishing Machine
|
|
The DELTA 31-735B includes 1-1/2 HP, 200-230/460V 60 hz, 3450 RPM Three Phase TEFC motor, 24V push-button station, magnetic starter, transformer, 3-leg overload protection (LVC), (2) tilting tables, 4 1/2 arbor pulley, guard for arbor pulley, V-belt, 80-grit aluminum oxide belt, 50-grit aluminum oxide disc, instruction manual, 3 phase electricals will be supplied wired for 230V, unless 460V is specified. Power cord and plug supplied for single phase only. Motors and motor controls may be ordered unmounted.4 dust port can be used with the micron bag provided or can be attached to a standard 4 dust collection system and built-in dust collector fan that collects dust from the body of the machine and exhausts into the bag. 5 micron bag provided but is not intended for metal dust collection, but is for wood sanding only.Integrated mobile base for ease of mobility.The right speeds make it well suited for both metal and wood shopsBelt operates at any angle - vertically, horizontally or any degree in betweenLarge tables are scientifically ribbed to prevent distortion.Furnished with sliding pivot pin for circle sanding.
|
|
DELTA 31300 Sanding CenterTM
|
|
The DELTA 31-300 includes 1-1/2 HP, 115/120Volts motor (wired for 120 Volts operation), on/off toggle switch, stand, dust collector connector, sliding pivot pin for circle sanding, 80-grit abrasive belt, 50-grit abrasive disc, wrench, instruction manualSturdy, cast-iron tables tilt 0° to 45° for bevel sanding.Sturdy steel stand for greater stability.Eccentric belt tracking control for easy, accurate belt alignment.Milled table slots permit use of accessory miter gauge for accurate straight and angle sanding.Fully-machined and balanced cast-iron disc for smooth, vibration-free operation and proper adhesion of adhesive discs.
|
|
Guide Rail Tote Bag
|
|
For up to two FS 1400/2 or shorter. Convenient for transporting a guide rail.
|
|
Olsonreg All Pro Band Saw Blades
|
|
Superior blades at affordable prices!
|
|
Kreg BlueKote8482 Weather Resistant Screws
|
|
Three chemically-combined anti-corrosion layers give Kreg’s Blue-Kote screws up to 400% more weather resistance than zinc-plated screws. They’re an ideal choice for garden and patio furniture, as well as for general exterior construction. Self-tapping screw tips make for easy driving. Case hardened steel won’t bend or break, and the deep-seated #2 square drive heads eliminate “cam out,” ensuring a tight, solid joint.
|
|
Thin Rip Tablesaw Jig
|
|
This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It’s simple to use; a single knob locks the jig into the miter track and locks your setting at the same time. Ball bearing guide keeps your workpiece firmly against the fence for perfect repeatability. Use the graduated scale to fine-tune for extremely thin strips. Note: Ripping thin strips requires the use of a zero-clearance insert. Guard and splitter were removed here for illustration purposes only.
|
|
Porter Cable Oscillating Spindle Sander
|
|
Get a smooth edge with ease on large projects. Variable speed control has rotation from 2400-3600 RPM and 38-80 oscillations per minute.
|
|
Pocket Hole Plugs
|
|
Create a seamless look to pocket holes, or use in another color as an accent! Our 3/8 pocket hole plugs are available in six different species and paint grade, letting you achieve the look you want for your project.
|
|
DELTA 50763 3 HP Dust Collector 2700 CFM
|
|
The DELTA 50-763 includes motor and blower, support frame, (2) 1 micron filtration bags, (4) 6 mil plastic chip collection bags, (2) snap-in bag rings, (4) 4 intake ports, (4) swivel caster assemblies, instruction manualStandard 1 micron filtration bags keep your shop safer and cleaner.Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust.Snap-in bag rings are faster, easier and eliminate need for cam-over-lock style clamps.6 mil plastic chip collection bags show you when the bags need emptying.Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way.
|
|
DELTA 33891 12 Radial Arm Saws
|
|
The DELTA 33-891 includes 2 HP, 230 Volts, 60 hz, 3450 RPM, 1 Phase motor (LVC), on-off key lock switch and overload protection, set of legs, automatic mechanical brake, blade guard with anti-kickback attachment,, retractable leaf guard, 12 combination blade, wrenches, instruction manualUnique turret arm action permits saw blade to rotate 360° above work table, giving full table capacity for left and right hand miters.Rigid channel, cast-iron frame and heavy column provide perfect alignment and continued accuracy.Precision indexing with positive stops for 90° and 45° miter cuts is precision machined for lifetime accuracy.Truck rods feature glass smooth hardened surfaces to minimize rolling friction. May be rotated 180° for new bearing surface.
|
|
DELTA 28475X 14 Band Saw wEnclosed Stand
|
|
The DELTA 28-475X includes 2 HP, 115/230 Volts, guarded drip proof motor with resilient mount, push button switch, chip chute, blade and belt guards, arbor and motor pulleys and V-Belt, blade guides, Platinum Pro band saw blade, chip chute, quick release blade tension lever, integrated 4 dust port, instruction manual, **Blade Length with 28-984 accy. height attachment: Max. 106 (2692 mm); Min. 103-1/2 (2629 mm); Standard 105 (2667 mm)Cut graceful curves, resaw thick hardwoods, make compound cuts...we've set the standard for years.We are raising the bar with a 2 HP motor, bolted together stand, intregrated 4 dust collection port, larger table and a new new quick indexing blade tension system. Innovative features and legendary performance are often copied but never equaled.Fully-adjustable upper and lower blade guides and blade support. Bearings maintain proper blade alignment.
|
|
Panhead Face Frame Screw
|
|
This screw is lube finished and designed to eliminate splitting. Square drive head has a flat bearing surface, semi-elliptical top and self-tapping wood auger tip. It is designed to eliminate splitting.100 per bag.
|
|
Table Saw Crosscut Sled
|
|
No more squinting at those tiny scales! This Crosscut Sled features a large protractor scale way out at the end of the fence, allowing you to precisely tune your angles for air-tight miters and crosscuts. Easy-to-read 1/2° graduations and a hair-line indicator ensure error-free setups. Spacious MDF surface works perfect for crosscutting large panels, while self-adhesive low-friction tape allows easy sliding. Heavy-duty aluminum fence features an adjustable MDF face and a sliding flip-down stop. An aluminum hold-down slides along a separate slot to prevent material from shifting during the cut. Spring-loaded ball bearings in the miter bar are adjustable for a no-slop fit to the track and smooth, accurate cuts.
|
|
DELTA 17950L 1612 Crosshair Laser Drill Press
|
|
The DELTA 17-950L includes 1/2 HP 120 Volts, 60 hz, 1720 RPM induction motor, fully adjustable laser pod, flexible lamp, tilting table, adjustable, locking depth stop, rack and pinon table raising/lowering mechanism, 5/8 (16mm) capacity chuck and key, belt and pulleys, column and base stand, Instruction manualFlexible lamp provides extra light to the work surface.Adjustable-position locking depth stop for accurate depth measurement and repetitive drilling.Bright laser crosshairs clearly indicate the drill point.9 Volt battery needed for crosshair lasers (battery not included)14 x 18 woodworker-friendly table includes T-Slot, a removable insert and tilts 0-45° forward and 0-90° left and right with positive stops at 0°, 45°, and 90°.Industrial induction motor for long-lasting, smooth performance.Twelve speeds for drilling a wide variery of woods, plastics and metals.Three-spoke pilot wheel for operator convenience.
|
|
DELTA 28682 18 WoodCutting Band Saw
|
|
The DELTA 28-682 includes 2 HP, 230 Volts, 60 hz, Single Phase induction motor with magnetic starter, 18 cast iron wheels, polyurethane compound tires, rip fence with guide bar, dual 4 dust ports, wheel brushes, adjustable ball bearing, blade guides, wrenches, instruction manual2 HP, 230 Volts, Single Phase 60 hz motor.Cast-iron wheels with polylurethane compound tires.Dust 4 dust ports.Cast-iron table with expandable table extensions.Ball bearing blade guides.Multi-locking table for added security.Ideal work height.12 resaw capacity under guides.Lower guide positioned close to cutting surface.Quick release tensioning system.Handles up to 1-1/4 blades.Adjustable posititive stops on the table tilt.Fully-adjustable, upper and lower blade guides and blade support bearings maintain proper blade alignment. Integral oil detents facilitate periodic lubrication to insure trouble-free performance.
|
|
The Complete TopSaver System
|
|
Tabletop rust remover and lubricant in one!
|
|
DELTA 28276 14 Band Saw with 34HP Motor Open Stand
|
|
The DELTA 28-276 includes stand, 3/4 HP, 120/240 Volts motor and switch, quick release tension lever, 4 dust collection port, 9-spoke wheel, blade and belt guards, arbor, motor pulleys and V-belt, blade guides, wood-cutting blade, instruction manual, **Blade length with accy. 28-984 height attachment: Max. 106 (2692 mm); Min. 103-1/2 (2629 mm); Standard 105 (2667 mm)Nine-spoke precision-balanced wheels.Full 16 x 16 cast-iron table tilts 45 degrees right and 3 degrees left for beveling operations.Quick release tension lever.4 integral dust port.Cast iron trunnions table support.Capacity to cut stock up to 6-1/4 thick (12-14 with height attachment)Lower blade guides have safe, accurate, micrometer adjustment.Lower guides angled to support blade to within 3/4 of table work surface--ensures accurate cutting.Fully-adjustable upper and lower blade guides and blade support. Bearings maintain proper blade alignment.
|
|
DELTA 36R51 10 Unisawreg 5 HP Single Phase Right Tilt Tablesaw
|
|
The DELTA 36-R51 tablesaw body includes 5 HP, 230 Volts, 60 hz, 3450 RPM Single Phase motor with full voltage magnetic starter and TEFC motor enclosure, TEFC motor enclosure, equipment mounting hooks, see-through blade guard, 10 diameter combination blade, miter gauge, table insert, motor pulley, set of three matching V-belts, 4 dust collection port, instruction manual5 HP, 60 Hz., 3450 rpm single phase motor with magnetic starter.Single-phase, 5 HP UNISAWS® must be operated with a 40 Ampere Slo-Blow Fuse.24V with transformer and 3-leg overload protection (LVC) may be ordered by adding -L to model number (36-R51-L)Note: Tablesaw shown with optional fence and side table which are not included.
|
|
DELTA 33895X 12 Radial Arm Saw
|
|
The DELTA 33-895X includes 2 HP, 230 Volts, 60 hz, 3450 RPM, Single Phase motor, on-off key lock switch and overload protection, set of legs, automatic mechanical brake, blade guard with anti-kickback attachment, retractable leaf guard, 12 combination blade, wrenches, instruction manual5 YEAR WARRANTY. All X5 series tools are backed by a best in class 5 year warranty. That is 3-4 years longer than other brands.2 HP, 230V, 60 hz, 3450 RPM, single phase motor.On-off key lock switch and overload protection.Blade guard with anti-kickback attachment.
|
|
Mini Kreg Jig and Kit
|
|
A pocket hole jig that fits right in your pocket, has a hardened steel drill guide and glass-reinforced nylon body with chip extraction hole. Check our kit which includes jig, pocket hole bit and stop collar!
|
|
Freudreg Box Joint Cutter Set
|
|
High-quality cutters are easy to use and will produce consistently flawless box joints in all wood and wood products.Fast set up for precise 1/4 and 3/8 joints without shims or adjustments!
|
|
SureLoc8482 Miter Gauge and Fence System
|
|
Rockler exclusive miter gauge features dead-on accuracy in 1-1/2 increments, a patented 'no-slop' bar and aluminum fence.Includes Miter gauge, Tru-Trac™ bar, polymer handle, 22 aluminum fence, and stop block made of MDF and melamine.Fits any 3/4' miter slot.Locks in all common angles: 22-1/2, 30, 45, 60 and 90.Precise repeatability.See also Miter Gauge MDF Fence sold separately.
|
|
Porter Cable SpeedBloc QuarterSheet Finishing Sander Model 330
|
|
Accepts both adhesive-backed and standard sandpaper.
|
|
Freud LU96R Thin Kerf LaminateMelamine Blade
|
|
Freud Industrial Series Teflon-coated thin kerf saw blade.A must for underpowered saws, thin kerf blades remove less material, which means you’ll get reduced waste and less power drain on your saw. Made with application specific micrograin carbide and TCG tooth design for flawless cuts in laminates and melamine!
|
|
Freud LU89M NonFerrous Metal Cutting Blade
|
|
From Freud's New Industrial Series. Use the LU89M series blade for cutting thick non-ferrous metal such as copper pipe, aluminum extrusions and brass plate.Blade has custom designed gullets to minimize chip build-up.
|
|
Incra Miter 5000 Sled
|
|
The ultimate miter cutting workstation for the table saw!Three-panel miter sled with patented Incra incremental angle control delivers perfect, repeatable accuracy. Includes 36-64 telescoping miter fence and dual flip stop.With 364 precision indexed angle stops over +/-90º to produce perfect, gap-free miter joints on any multi-sided object.
|
|
Forrest Woodworker II General Purpose Blade
|
|
Get a smooth-as-sanded surface! Rips and crosscuts hardwoods up to 2 thick. Ply-veneers of oak and birch will crosscut with no bottom splinter at moderate feed rates.Ends second-step finishing (jointing and sanding not required).
|
|
Deluxe Kerf Blades for SmallBox Hinges
|
|
Here’s a fast way to install jewelry box hinges that requires no screws. Rather than cutting hinge mortises, pre-boring for screws, then screwing the hinges on, just cut a kerf with your drill press and push a kerf hinge into the slot. The barbs on the hinge leaves dig in for a firm grip. With a unique design of 12 teeth per blade, these blades cut much faster than similar models and expel chips very efficiently. Unlike similar systems, our Kerf Hinge Blades come in two thicknesses. The thicker blade is for hardwoods, while the thinner blade creates a tighter fit in softwoods like pine and cedar.
|
|
Cover Plate
|
|
Encloses blade housing for improved dust extraction.
|
|
Shop Built Panel Saw Plan
|
|
Cut large stock accurately and save hundreds compared to other systems when you build your own pro-quality saw with our plan and hardware kit.Now available, Downloadable PDF Panel Saw Plan
|
|
Thick Scroll Blade
|
|
This is the first scroll saw blade specially designed to cut through thick wood cleanly.
|
|
Kreg Face Clamp
|
|
Secures members when driving screws through pocket holes! Easily aligns face frame joints quickly and accurately, and won’t dent wood.
|
|
Superbar Table Saw Gauge
|
|
Prevents kickback by keeping saws aligned, tuned up and calibrated to with in a thousandth of an inch!
|
|
Freud LU84R Combination Blades
|
|
Classic combination design is produced with extreme precision using lasers to cut the hardened blade body and tensioning machines to ensure the blade stays true and flat under load.Great for ripping and crosscutting!
|
|
Freudreg LU85R Ultimate Cutoff Blades
|
|
The ultimate cutoff blades for glass-smooth finishes! Creates the maximum finish every time.
|
|
Freudreg LU97R DoubleSided LaminateMelamine Blade
|
|
Delivers ultra long life and excellent finish on the top and bottom of laminates, melamines and veneered plywood.Triple Chip Grind Tooth design with a negative hook angle for super life in abrasive man-made materials.
|
|
Rockler Incra Router Bit Sets
|
|
These router bit sets are designed for use with the Incra jig system. They have 1/2 shanks to reduce chatter and provide maximum performance.Choose from 3-piece and 6-piece sets.
|
|
Bosch 14Sheet PalmGrip Finishing Sander Kit
|
|
Innovative design lets you quickly load sandpaper for a perfect fit every time, making this the perfect finishing sander for all your project needs!2 amp motor handles a wide variety of sanding applications.12,000 OPM for fast removal of fine stock.
|
|
Infiniterreg RS1 Laser Cutting Guide
|
|
Produces a bright, easy-to-see line for dead-on accurate cuts. Triggered by the centrifugal force of the machine, it starts automatically with powered saw action.Fits most 7-1/4, 8, 10 and 12 miter/chop/cutoff and handheld circular saws.Easy to install and use!Powered by three alkaline batteries (included).5/8 arbor with squared end and internal threading.
|
|
Incrareg Miter 1000SE with Telescoping Fence
|
|
Achieve mitering accuracy that you never thought possible! Special Edition miter gauge comes with sturdy telescoping fence and dual-arm Flip Shop Stop for accurate miter cuts on the table saw or router table.Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive angle stops in 5º increments over a full 180º range, with special stops at 22-1/2º and 67-1/2º.Stainless steel vernier cursor delivers an incredible 1/10º resolution between fixed steps.Get perfect, repeatable accuracy every time – whether making basic 90º cut-offs, simple picture frames, complex compound miters, or a 20-sided object.
|
|
Starrettreg HSS Jig Saw Blades
|
|
Innovative, high-quality High Speed Steel jig saw blades have unified shanks with Bi-Metal Unique™ technology to reduce breakage.Blade design and cutting stroke produces dual chips that are more easily removed from the cut.Blades fit most jig saws.
|
|
Clamping Miter Gauge
|
|
Clamping miter gauge is safer than standard miter gauges because it keeps your hands where they belong - away from the blade.
|
|
Kreg DB110 8220Foreman8221 SemiAutomatic Pocket Machine
|
|
If your production needs have outpaced a manual jig, look to the Kreg Foreman Pocket Machine to handle the job.Entirely electric - no compressed air needed!Lever operated, 1 second cycle time.3/4 HP electric motor.
|
|
Digital Angle Gauge
|
|
Read precise angles in seconds! Built-in super strong magnets securely attach the gauge to a saw blade so you can quickly and easily set the bevel angle to 0.1 resolution. Works great for miter saws and table saws, plus set the angle of jointer fences and band saw tables.Zero button calibrates the gauge to any reference surface.Range is +/- 150.Includes 3.0V battery.
|
|
Delta 12 Disc Sander with Integral Dust Collection
|
|
Model 31-120 Delta Industrial Model 31-120 12 Disc Sander with Integral Dust Collection includes a 1/2HP, 120V motor; hose with 2 1/2 I.D. connectors, 80-grit abrasive disc, wrenches and instruction manual.
|
|
Oshlun 6 Stack Dado Set
|
|
Make perfect flat-bottom cuts! Affordable saw blade and dado set features full-size chippers for easier setup and less chance of wobble or vibration. With C-4 industrial quality carbide tips. Ideal for all types of dimensioned lumber, plywood, soft wood, hard wood, artificial and processed woods, and melamine.
|
|
Segmented Bowl Setup Angles
|
|
Ever have trouble cutting accurate bowl segments? Now you can take the guesswork out of your next setup! Set of seven angle blocks allow you to quickly and accurately set up your miter gauge or blade angle to cut precise segmented bowl pieces.Compare to aluminum angle blocks that cost $100 more!Includes 45 block (for 4 segments), 30 (6 segments), 22.5 (8 segments), 20 (9 segments), 18 (10 segments), 15 (12 segments) and 11.25 (16 segments).Laser-cut acrylic.
|
|
Oshlun 8 Stack Dado Set
|
|
Make perfect flat-bottom cuts! Affordable saw blade and dado set features full-size chippers for easier setup and less chance of wobble or vibration. With C-4 industrial quality carbide tips. Ideal for all types of dimensioned lumber, plywood, soft wood, hard wood, artificial and processed woods, and melamine.
|
|
Premium Band Saw Blades
|
|
The versatility of these hard edge flex back blades is unmatched.
|
|
Topcote DriCote Bearing Lubricant
|
|
Protect your tools with these fine products.
|
|
Precision Taper Jig
|
|
A scaled cutting jig on a table saw to cut accurate tapers.
|
|
Scroll Saw Blades
|
|
The standard of the industry, these blades offer versatility and reliable service..
|
|
INCRA Precision TRules
|
|
Easy to use, versatile and precise are the words which best describe the new INCRA T-Rule. Low glare, matte textured background for high contrast and easy legibility. View INCRA Precision T-Rules Video Download INCRA Precision T-Rules Video AVI Demo - 23.78 MB WMV Demo - 0.96 MB TRulesAVI.avi - 23.78 MB TRules.wmv - 0.96 MB ---
|
|
INCRA Precision Marking Rules
|
|
The first stainless steel rule with micro-fine guide holes for marking a fine dot with a sharp pencil or metal scribe.
|
|
INCRA Precision Bend Rules
|
|
This unique rule is precisely what you need for layout and measurement along the edge of a board or other workpiece. View INCRA Precision Bend Rules Video Download INCRA Precision Bend Rules Video WMV Demo - 1.25 MB WMV Demo - 3.68 MB AVI Demo - 30.52 MB BendRules.wmv - 1.25 MB BendRulesAVI-1.wmv - 3.68 MB BendRulesAVI.avi - 30.52 MB ---
|
|
INCRA Precision Protractor
|
|
We've reinvented the protractor by putting micro-fine guide holes at every 45o, 30o, 22.5o, 5o, 1o and 0.5o interval to plot any angle with ease and absolute accuracy. View INCRA Precision Protractor Video Download INCRA Precision Protractor Video AVI Demo - 23.78 MB WMV Demo - 0.96 MB ProtractorAVI.avi - 23.78 MB Protractor.wmv - 0.96 MB ---
|
|
INCRA Precision Centering Rule
|
|
Find the exact center of any workpiece up to 12' wide. Has a built-in protractor, too. View Centering Rule Video Download Centering Rule Video AVI Demo - 7.9 MB WMV Demo - 1.36 MB CenteringRuleAVI.avi - 7.9 MB CenteringRule.wmv - 1.36 MB ---
|
|
Freudreg 10 x 40T Hi ATB Premier Fusion General Purpose Blade
|
|
Delivers a quieter, smoother cut with a superior finish and extended cutting life. Unique design and special polymer filler reduces vibration above and beyond any other blade for superior performance. Ideal for hard and soft wood, veneered plywood and melamine.
|
|
PorterCable Deluxe Biscuit Joiner Model No 557
|
|
7.5 amp motor delivers plenty of bite. Includes 2' and 4' diameter blades for standard and face frame biscuits.
|
|
Irwinreg Marathonreg 80T Blade with FREE 24T Blade
|
|
Buy an 80T thin-kerf trim blade and get a FREE 24T thin-kerf rip blade — a $79.98 value for less than $50! This set will take care of everything from ripping rough lumber to the finest finish work. Both blades feature micro-grain C3 tungsten carbide tips for long life, and #400 grit diamond-ground teeth for fast, clean cuts. The thin kerfs mean less waste and less work for your saw, and fully hardened plates keep the blades running truer, longer. Features specially engineered heat vents to reduce heat and resin buildup. Precision tensioned and balanced for optimum accuracy. Unique reinforced shoulders adds stability and durability. The Irwin Marathon 10' x 24T Framing/Ripping Blade features 24 rugged teeth that will tear through Maple like it was Pine. The Irwin Marathon 10' x 80T Trim/Finish Blade is perfect for mitering and other detail work. 5/8 arbor on both blades.
|
|
Phenolic Table Saw Insert Kit
|
|
Make your own Zero Clearance throat plate and save! This Kit includes two phenolic plates for only a little more than the cost of one pre-cut plate! Just rout to the size you need with a Shear Cutting Flush Trim Bit (24740). Also works great for band saws, scroll saws, jigs and fences. Phenolic is extremely hard for optimum durability and provides friction-free sliding. It’s so hard, that traditional drill bits have a hard time getting through. No problem! Just use our exclusive Phenolic Countersink Drill Bit (34423) for the leveler holes. It is machined especially for phenolic, cuts quickly and won’t wander. Insert Kit includes two phenolic plates with 12 screws for leveling.
|
|
Olsonreg All Pro8482 Band Saw Blade Assortment 9312
|
|
Your bandsaw will be ready for anything with this assorted blade pack and you’ll save money too! Resaw your lumber into thin boards or veneers with the sturdy 5/8 blade. Cut thin stock and intricate scrollwork with the 3/16 blade. The 1/4 blade is a great workhorse blade for general purpose work.
|
|
Olsonreg All Pro8482 Narrowwidth Band Saw Blades 9312
|
|
Turn the tightest corners possible with these narrow width blades! These blades contain pin-point carbides, molybdenum, nickel, chrome and silicon to ensure maximum durability and easy cutting.
|
|
Porter Cable 390K 5 Low Profile Random Orbit Sander Kit with Hook Loop Pad
|
|
A new standard for palm-grip sanders! This low-profile tool’s revolutionary 3.5 Amp EnduraTech brushless motor boosts performance in every major aspect of operation; and with 71% fewer wearable parts, it’ll last 5-10x longer than traditional motors. An Electronic Load Control feature monitors the rpm and makes automatic adjustments that maintain a constant operating speed for smooth sanding and 42% faster material removal. The 390K saves time with an innovative electronic motor brake, as well, which reduces spin-down waiting by 73%. A separate mechanical pad brake reduces free-spin—effectively putting an end to gouging—while a compact design brings the sander’s height down by 31% over previous models for superior control and finish. Includes sander with 5 hook and loop pad with 8 hole pattern, a storage case, and a user manual.
|
|
Kapex Crown Stop with Base Extension
|
|
This accessory for Festool’s Kapex Compound Miter Saw attaches to either side of the Kapex deck. Sold separately, it supports nested workpieces at any angle and provides additional material support. Festool FS Clamps can be combined with the Crown Stop to create additional clamping possibilities. Includes one base extension and on crown stop. Two are required for cutting crown molding in the nested position.
|
|
Biscuit Cutter Gauge
|
|
This gauge shows the exact width and depth of sizes 0, 10 and 20 biscuits slots, allowing you to determine which biscuit size will fit before cutting (and potentially blowing out an edge). Once correctly positioned, the pencil slots allow you to perfectly center your marks. Gauge shows actual cut, which accomodate the swelling of the biscuit once glue is applied. Hole allows it to be hung on the wall.
|
|
Vertical Panel Saw plus Accessory Package Vacuum sold Separately
|
|
This package combines the Vertical Panel Saw (25474) with wheels (25639), a fixed stand, an 8'x 60T ATB sawblade, dust collection shroud, fittings, hose and a Quick Stop™ Gauge. Sold separately, these accessories would cost $855.00 - buy the package and save $444.00! Panel saw features a 15 amp, 3 HP Milwaukee saw mounted to a 5' welded steel frame.Features rotating saw head, adjustable rulers and spring-loaded saw counter-balance system. Crosscut capacity - 50', Rip capacity - 96', Thickness capacity - 1-3/4'. Optional Accessories: folding stand and extensions. Additional Shipping charges of$187 will apply. Allow 2-3 weeks for delivery.Fein vacuum in photo sold separately.
|
|
Digital Height Gauge
|
|
Enjoy the rewards of precisely fitting joints and perfectly tuned machines! This multi-purpose gauge is accurate to within 0.001. It can be used to set the exact height of your blade or bit on the table saw, router table and a host of other machines. You can raise the gauge to the desired height and raise the blade to match, or you can set the caliper on the bit and raise it until the display reads the correct height. It’s also an ideal tool for leveling the knives and setting the depth of cut on your jointer. Heavy, solid steel base provides maximum stability. Changes from inches to millimeters and zeroes out with the push of a button.
|
|
Kreg Jig K4 Pocket Hole System
|
|
Priced roughly $40 less than the previous K3 model, this full-service pocket-hole drilling system is packed with value. It includes all the core equipment and everything you need to drill fast and easy pocket holes: a classic benchtop design, compatibility with all Kreg Jig Master System accessories, even a SkillBuilder™ DVD and rugged carrying case! For strong, convenient, and professional-looking joinery — this is it.
|
|
Fein Multimaster FMM 250Q Top Kit
|
|
Includes the new Multimaster FMM 250 Q, boasting 40% more power, better ergonomics and the ability to change accessories with just the flip of a lever. Go from saw to sander to scraper in just seconds. Unique oscillating action makes quick work out of tough, picky jobs like removing grout and scraping paint, and it’s the perfect sander for tight spots that you’d otherwise have to hand-sand. Variable speed lets you slow it down for delicate parts and crank it up for quick removal. Kit includes FMM 250 Q, sanding pad, universal E-CUT saw blade (29mm), carbide-tipped segment saw blade, HSS saw blade, rigid stopping knife, plus 5 each of 80, 120 and 180 grit sanding sheets, profile sanding set, dust extraction device, perforated sanding pad, 5 each of 80, 120 and 180 grit perforated sanding sheets, perforated triangular carbide rasp and a plastic carrying case.
|
|
Bosch 12V Cordless Max MultiX Tool
|
|
This new cordless oscillating tool is small in stature but big on versatility and performance. It tackles dozens of cutting, sanding, and grinding jobs - all without a cord or a hefty pricetag. It uses Bosch’s ultra-compact 12V Max Litheon battery system to deliver power and precision all around the shop and home. Plus, with a wide array of accessories to choose from, as well as the ability to use Fein and other manufacturer’s attachments, the Bosch Multi-X is one of the best values on the market.
|
|
Saw BladeRouter Bit Cleaning Kit
|
|
With clean, cool-running cutters, you’ll get more precise cuts, a longer cutter life and spend far less on sharpening costs. Jumbo sized blade bath features a raised inner ring, which prevents the blade from suctioning to the bottom. 14 inside diameter accepts a 12 blade with plenty of room at the edges for easy removal. Includes blade bath with lid, 1 quart of Pitch and Resin Remover (makes 1 gallon), brass-bristled scrub brush and a 6 oz. plastic jar with lid for cleaning router bits.
|
|
Freud Doweling Joiner
|
|
Dowel joinery will never be the same! This portable, hand-held tool works just like a biscuit joiner to cut perfectly spaced dowel holes for joinery, shelf pins, furniture repair, and more. Plus, with bits spaced exactly 32 mm apart, it’s especially suited for Eurpean cabinet applications. Drills two holes simultaneously up to 1-3/8 deep. Features a powerful 6.5 amp motor and a precision-adjustable rack-and-pinion fence.
|
|
Kreg 675Pc SelfTapping Pocket Hole Screw Kit
|
|
Affordable, quality screw kit contains five of the most popular screw sizes for pocket hole joinery, and now comes in a new and improved case. Includes #6 x 1 pan-head fine (150), #7 x 1-1/4 washer-head fine (150), #8 x 2-1/2 washer-head coarse (75), #8 x 1-1/4 washer-head coarse (150), and #7 x 1 pan-head coarse (150). All screws feature a self-tapping tip and deep, #2 square drive recess. |